Titanium carbide guide wheel - high hardness
The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance can be further enhanced by 30%, making it suitable for processing high-hardness alloy wires. Its weight is 30% lighter than that of steel guide wheels of the same size, which can reduce the load on the drive motor and lower energy consumption by more than 15%. In the production of precision tubes, the groove accuracy of the guide wheel reaches IT3 grade, which can ensure that the outer diameter tolerance of the tube is controlled within ±0.01mm, meeting the high-precision requirements of the medical, aviation and other fields. The hard alloy titanium carbide guide wheel has excellent thermal shock resistance. It will not crack when the temperature rises sharply from room temperature to 300℃ and then drops sharply back to room temperature, making it suitable for intermittent production conditions. The size range of guide wheels is wide, with diameters ranging from 50mm to 500mm and widths from 10mm to 100mm, which can be adapted to different types of drawing or rolling equipment. In the production of optical fibers and cables, it can precisely guide optical fibers, keeping the attenuation rate of optical fibers below 0.2dB/km and ensuring the quality of communication.
Other supplier products
|
|
High-strength titanium carbide round rods |
Titanium carbide alloy rods are alloy rods with titanium carbide as the main component, combining high hardness, wear-resistant properties, good ... |
|
|
Stamping die carbide round bar |
Titanium carbide round bar, also known as TiC bar, is a kind of metal-ceramic bar with steel as the binding phase and titanium carbide as the hard ... |
|
|
Surface finish Ra≤0.2μm Titanium carbide alloy bar |
Titanium carbide alloy bar is an alloy bar with titanium carbide as the main component, combining high hardness, wear-resistant properties, good ... |
|
|
Chromium carbide powder for high-temperature wear-resistant coating |
This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The pa... |
|
|
High wear-resistant carbide titanium alloy guide wheel |
The guide wheel is equipped with precisely machined installation holes, which can strictly control the fit clearance with the shaft within 0.005- 0... |
All supplier products
Same products
