Titanium carbide guide wheel - high hardness
The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance can be further enhanced by 30%, making it suitable for processing high-hardness alloy wires. Its weight is 30% lighter than that of steel guide wheels of the same size, which can reduce the load on the drive motor and lower energy consumption by more than 15%. In the production of precision tubes, the groove accuracy of the guide wheel reaches IT3 grade, which can ensure that the outer diameter tolerance of the tube is controlled within ±0.01mm, meeting the high-precision requirements of the medical, aviation and other fields. The hard alloy titanium carbide guide wheel has excellent thermal shock resistance. It will not crack when the temperature rises sharply from room temperature to 300℃ and then drops sharply back to room temperature, making it suitable for intermittent production conditions. The size range of guide wheels is wide, with diameters ranging from 50mm to 500mm and widths from 10mm to 100mm, which can be adapted to different types of drawing or rolling equipment. In the production of optical fibers and cables, it can precisely guide optical fibers, keeping the attenuation rate of optical fibers below 0.2dB/km and ensuring the quality of communication.
在线联系供应商
Other supplier products
 |
Titanium carbide hard rods support small-batch trial use | Titanium carbide (TiC) round rods fabricated from tungsten carbide-based cemented carbides exhibit exceptional anti-adhesion properties. During mac... |
 |
Titanium carbide guide wheels that reduce material loss by 10% | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Suitable for continuous high-intensity operation carbide guide wheel | Titanium carbide guide wheel is made of high hardness titanium carbide material, with excellent wear resistance, high temperature resistance and ... |
 |
Titanium carbide rods are suitable for complex processing | Titanium carbide round rods fabricated from hard alloys exhibit exceptional electrical conductivity, making them suitable for use as electrodes in ... |
 |
Sub-micron titanium carbide powder | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
Same products
 |
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
