Titanium carbide TiC ceramic powder

• 
• 
• 
• 
• 

Titanium carbide powder is a grayish-black ultrafine powder with a purity of over 99.9%, and an average particle size ranging from 0.5 to 5μm. It features a high melting point (3140℃) and high hardness (Mohs hardness 9-10). It is the core raw material for preparing titanium carbide hard alloys and ceramic materials. In powder metallurgy, when mixed with cobalt and nickel powders and sintered, it can be made into high-performance alloys. The powder has good sphericity and excellent fluidity, with a bulk density of 2.5-3.0g/cm³, which can ensure the uniformity of the composition of the sintered products and prevent the occurrence of pores or segregation. In the production of cemented carbide, the addition of titanium carbide powder can increase the wear resistance of the alloy by 20-30%, and it is widely used in cutting tools, molds and other fields. With the development of the new energy industry, titanium carbide powder is also applied in lithium-ion batteries. When used as an anode material, its theoretical capacity reaches 350mAh/g and its cycle life exceeds 1,000 times. After the surface of the powder is coated with a layer of carbon, its conductivity is further enhanced, and the charging and discharging efficiency of the battery is increased to over 95%. In the field of energy storage, it provides a new direction for the research and development of high-performance batteries and promotes the progress of new energy technologies.

Other supplier products

	Thermal spray titanium carbide powder	Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric a...
	Titanium carbide hard rods support small-batch trial use	Titanium carbide (TiC) round rods fabricated from tungsten carbide-based cemented carbides exhibit exceptional anti-adhesion properties. During mac...
	Wear-resistant composite material chromium carbide powder	Chromium carbide powder is a grayish-black powder with a melting point of approximately 1890℃ and a Mohs hardness of 8.5. It features excellent wea...
	Titanium carbide guide wheels with no scratch contamination on the surface	硬质合金碳化钛导轮具有优异的抗冲击性能。当丝突然受力或断裂时，它们不易裂纹或变形，从而降低设备停机的风险。它具有优异的热传导性能，可以迅速散发摩擦产生的热量，使导轮的工作温度保持在80℃以内，防止丝因过热而退火。在弹簧钢丝的生产中，使用这种导轮可以将钢丝的直线度误差控制在0.5mm/m以内，从...
	Unfinished bar stock - heat treatable	This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sintering of ultrafine TiCN powder (particle size: 1&nda...

Same products

	Aluminum Alloy Wheels Scrap For Sale, Scrap Aluminium Wheel Scrap Supplier, Aluminum Wheels Scrap For Sale, Aluminum Rim Wheels Scrap Supplier	Seller: Best Link Scrap Inc-plastic recycling	At Best Link Scrap Inc., we specialize in supplying high-quality Aluminum Alloy Wheels Scrap For ...
	3D printing spherical titanium carbide powder	Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont...
	Titanium carbide hard alloy drive wheel - Specialized	Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte...
	Industrial guide wheels, titanium carbide wear-resistant alloy	Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ...
	Unfinished bar stock - heat treatable	Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter...