Titanium carbide guide wheel - wear-resistant and durable
The working temperature range of hard alloy titanium carbide guide wheels is wide, and their performance is stable in an environment from -100℃ to 600℃. They can be used normally in both low-temperature frozen pipe production and high-temperature hot rolling processes. The hub and flange of the guide wheel adopt an integrated design, avoiding the problem of detachment caused by welding or bonding, and the service life can reach more than 100,000 hours. In the cable industry, it can precisely control the concentricity of the cable insulation layer, keeping the deviation within 0.05mm and ensuring the electrical performance of the cable. The dynamic balance accuracy of the guide wheel reaches G0.4 grade. When rotating at high speed, the vibration amplitude is less than 0.01mm, which can reduce the vibration noise of the equipment and improve the working environment in the workshop. It has good chemical stability and will not undergo chemical reactions with metal wires, thus avoiding contamination or discoloration on the wire surface. In the production of precious metal wires (such as gold and silver wires), the clean surface of the guide wheel can prevent the loss of precious metals and reduce production costs.
Other supplier products
|
|
Titanium carbide hard alloy guide wheel - Wear-resistant |
The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance ... |
|
|
Steel-bonded hard alloy round bar, TiC hard phase, steel bonding phase |
Compared with conventional high-speed steel bars, carbide titanium round bars enable a 3–5× increase in cutting speed, thereby substant... |
|
|
Chromium carbide powder for high-temperature wear-resistant coating |
This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The pa... |
|
|
Customized chromium carbide powder |
碳化铬粉末可与其他耐磨材料粉末（如碳化钨、二硫化钼等）混合，形成复合涂层，兼具高耐磨性和自润滑性，摩擦系数低至0.05，适用于无润滑或难润滑工况。在造纸机械烘缸表面，该复合涂层可减少纸张摩擦损伤，防止粘纸，提高生产效率。粉末粒径均匀，粒度分布偏差小于10%，确保涂层微观结构一致，避免性能缺... |
|
|
High hardness ultra-fine grain carbide round rods for CNC cutting tools |
Titanium carbide alloy round bar is a high-performance material made of titanium carbide (TiC) as a base, by adding metal or ceramic reinforcing ... |
All supplier products
Same products
