Titanium carbide hard alloy guide wheel - Wear-resistant
The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance can be further enhanced by 30%, making it suitable for processing high-hardness alloy wires. Its weight is 30% lighter than that of steel guide wheels of the same size, which can reduce the load on the drive motor and lower energy consumption by more than 15%. In the production of precision tubes, the groove accuracy of the guide wheel reaches IT3 grade, which can ensure that the outer diameter tolerance of the tube is controlled within ±0.01mm, meeting the high-precision requirements of the medical, aviation and other fields. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
Send product request
Other supplier products
 |
Titanium carbide rods are available for small-batch purchase | Titanium carbide round rods made of cemented carbide exhibit excellent electrical conductivity, making them suitable for use as electrodes in elect... |
 |
Chromium carbide powder for automotive brake pads | This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The pa... |
 |
Supersonic spraying of chromium carbide powder | Chromium carbide powder is a gray powder with high hardness, wear and high temperature corrosion resistance properties, often added as a hard phase... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure titanium carbide powder. Its hardness exceeds HRA ... |
 |
Titanium carbide rods - Precision grinding processing | The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm. It is suitable for secondary pro... |
