Fatigue life increased by 50% Titanium carbide round rods
titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content (usually 70-90%) and binder ratio. When the titanium carbide content is higher, it is more wear-resistant and suitable for roughing scenarios; an increase in the binder ratio improves toughness and makes it more suitable for finishing. Its density is only 6.5g/cm³, 20% lighter than tungsten carbide rods of the same size, making it suitable for making lightweight tools. In the 3C electronics industry, it is commonly used to process precision parts such as mobile middle frames and laptop shells, which can ensure that the product surface is free of scratches and small dimensional errors.
Other supplier products
|
|
Titanium Carbide Powder for Powder Metallurgy |
Titanium Carbide Powder (TiC) is a gray cubic ferrous metallic surface powder with a crystalline structure, made from sodium chloride. It is a ve... |
|
|
Chromium carbide powder that extends the service life of rolls by five times |
This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The pa... |
|
|
Supersonic spraying of chromium carbide powder |
Chromium carbide powder is a gray powder with high hardness, wear and high temperature corrosion resistance properties, often added as a hard phase... |
|
|
Production of titanium carbide powder by aerosolization process |
This powder has good electrical and thermal conductivity, electrical conductivity of 3 × 10⁴S/m, thermal conductivity of 35W/(m-K), can be ... |
|
|
Carbide guide rollers for wire and cable production |
Lighter than Tungsten carbide roller by 55%, Lighter than tool steel than 20%, so the guide roller accelerates from standstill to 35,000 rpm, witho... |
All supplier products
Same products
