1.2316/3Cr17Mo Plastic Mold Tool Steel Plates Bars Sheet Forgings
Product Details
Specification
|
Round bar |
Diameter(mm) |
Length(mm) |
- |
|
Forged round bar：φ50~450 |
2000~6000 |
- |
|
|
Rolled round bar：φ10~80 |
2000~6000 |
- |
|
|
Flat bar |
Thickness(mm) |
Width(mm) |
Length(mm) |
|
Forged plate：20~300 |
50~710 |
2000~6000 |
|
|
Rolled plate：10~65 |
155~610 |
2000~6000 |
Chemical composition（%）
|
Standard |
Steel Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
other |
|
DIN |
≤1.00 |
≤1.00 |
Ni≤1.00 |
||||||
|
ASTM |
3Cr17Mo |
- |
- |
- |
- |
- |
- |
- |
- |
|
GB |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Trade of steel and characteristics:
Hardenable steel, resistant to oxidation and corrosion.
The high chromium content combined with low carbon provides a good resistance to corrosion, subject to surface being perfectly polished after heat treatment.
Applications:
Moulds for corrosive thermoplastic material. Chromizing is not necessary.
These two grades allow very high polish.
They are generally supplied pretreated to 800-1100 N/mm2 according to request.
Heat treatment(if necessary):
steel suppliers:
Heat treatment:
Annealing: Temperature: 780-800℃
Holding time: 4-6H; Slow surface cooling
Hardness after annealing: max.250HB
Stress relieving: Temperature: appr.650℃
Holding time: 1-2H; Slow surface cooling
Hardening: Temperature:1020-1050℃
Quenching: oil or polymer(interrupt at appr.120-150℃).
Hardness obtainable: appr.52HRC
Tempering: According to diagram, to values between 800 and 1100 N/mm2.
Nitriding: Possible with appropriate tempering;
However, this treatment reduces resistance to corrosion.
,based on the over one hundred years’s production history of in Huangshi, provide professional services and material for cutting tool companies, mould companies and other industrial enterprises all over the world for years.
Send product request
Other supplier products
 |
High toughness H13 1.2344 SKD61 Hot Work Tool Steel | Product Details Chemical Composition (%) Standard Steel Grade C Si Mn P S Cr Mo V W DIN - ASTM H13 ... |
 |
S5 Cold Work Tool Steel Plates Bars Sheet Forgings | Preheating: Heat at a rate not exceeding 400°F per hour (222°C per hour). For complex and large tools, heat to 1150-1250°F (621-677&de... |
 |
45CrNi4Mo/1.2767 Hot Work Tool Steel Plates Bars Sheet Forgings | Product Details Chemical composition C Mn Si Cr V Mo P S - ≤0.03 ≤0.03 Equivalent grades: DIN AFNO... |
 |
GCr15/52100/SUJ2 High-carbon chromium alloy steel Bearing Steel Plates | GCr15 is a high-carbon chromium alloy steel, for its versatility, is used in a variety of mechanical applications. In the annealed condition this ... |
 |
M2/1.3343 High Speed Tool Steel Plates/Bars/Sheet /Forgings | Molybdenum high speed tool steel. Very high resistance to softening at elevated temperatures. Very high resistance to wear. Good toughness and cut... |
Same products
 |
Cleaning Agent | Seller: Foshan Jiwei New Material Co.,Ltd | Cleaning Agent PUR cleaning agentis a specialized solution designed for effectively removing pol... |
 |
3D Laminating Water-Based Polyurethane Adhesive | Seller: Foshan Jiwei New Material Co.,Ltd | 3D Laminating Water-Based Polyurethane Adhesive 3D laminating water-based polyurethane adhesivei... |
 |
Liquild PUR Adhesive | Seller: Foshan Jiwei New Material Co.,Ltd | Liquild PUR Adhesive PUR adhesive, also known as polyurethane reactive adhesive or polyurethane ... |
 |
PUR for Edge Banding | Seller: Foshan Jiwei New Material Co.,Ltd | PUR for Edge Banding Edge banding adhesiveis a type of glue used in furniture manufacturing and ... |
 |
PUR for Flat Lamination | Seller: Foshan Jiwei New Material Co.,Ltd | PUR for Flat Lamination Our PUR (Polyurethane Reactive) adhesive is specially formulated for fla... |
