Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50
Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50
Ceramic Foundry Sand is a corundum based casting sand. It is produced from fusing bauxite material. As a spherical casting sand, the ceramic beads get excellent flowability, low angularity. That is helpful to improve the casting quality and surface quality.
Characters:
- Low thermal expansion coefficient and low expansion rate. That is key factor that ceramic casting sand to make precise size castings.
- Good flowability can make the sand fill the mold easier.
- High strength with goods compressive strength and bending strength.
- Chemically neutral material.
- higher refractoriness than silica sand.
- Recyclable.
- Low bulk density than chromite sand. Save resin consumption for RCS casting.
- Good thermal conductivity.
- Chemical stability.
TYPICAL CHEMICAL ANALYSIS
AL2O3 |
70-75% |
SiO2 |
8-20% |
Fe2O3 |
≤3% |
TiO2 |
≤3.5% |
CaO |
≤0.45% |
MgO |
≤0.35% |
K2O |
≤0.33% |
Na2O |
≤0.08% |
TYPICAL PHYSICAL PROPERTIES:
Refractoriness |
≥1800 ℃ |
Specific gravity: |
|
Bulk density(LPD): |
|
Color: |
black brown |
Grit shape: |
spherical Ball |
Thermal expansion coefficient |
6x10-6 /℃(20-1000℃) |
Thermal conductivity |
|
Thermal expansion ratio |
|
Angularity |
≤1.1 |
Available sizes
AFS15-20,AFS15-25,AFS25-35,AFS25-30,AFS30-35,AFS35-40,AFS40-45,AFS45-50,AFS40-50,AFS50-55,AFS55-60,AFS60-65 Customized sizes are available upon request
Sizes for different casting applications:
Applications |
AFS SIZE |
Foundry sand for Lost foam |
AFS15, AFS20, AFS25 |
Filler sand |
AFS30, AFS35, AFS40 |
No bake sand including furan resin /alkaline-phenolic resin molding and core making/ Pep set /Sodium-silicate bonded sand |
AFS35, AFS40, AFS45, AFS50, AFS55, AFS60, etc. |
Shell molding, resin coated sand casting |
AFS55, AFS60, AFS65, AFS70, AFS80, AFS90, AFS100, AFS110, etc. |
Lost foam casting coating |
AFS70, AFS80, AFS90, AFS110, etc. |
Molding sand alcohol-based coating |
AFS SIZE |
3D printing, precision casting, investment casting |
AFS70, AFS80, AFS90, AFS110, etc. |
Applications:
- Raw material for ladle filler sand
- Shell molding casting.
- No-bake sand casting.
- Precision Casting
- Lost foam casting
- Resin coated sand casting
- Vacuum casting
- Investment casting
- Sand casting.
Send product request
Other supplier products
Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50 | Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50 Ceramic Foundry Sand is a corundum based casting sand. It is produced from fusing bauxite mater... | |
Silicon carbide abrasive material GOST 3647 | Green silicon carbide grit Green silicon carbide grit is a very hard abrasive material . The hardness of itonly ranks after diamond and B4C, and it... | |
Green silicon carbide F150 | Green silicon carbide grit Green silicon carbide grit is a very hard abrasive material . The hardness of itonly ranks after diamond and B4C, and i... | |
High quality boron carbide extra fine powder F1000 F1200 | High quality boron carbide extra fine powder F1000 F1200 neutron shielding additive B4C boron carbide powder,also known as B4C is produced from hi... | |
silicate zirconia microsphere B40 for shot blasting | silicate zirconia microsphere B40 for shot blasting The main component of ceramic shot is zirconia, which is mainly used for surface treatment s... |
Same products
Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50 | Seller: Zhengzhou HAIXU Abrasives | Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50 Ceramic Foundry Sand is a corundum based cast... | |
98% SiC refractory sand F012 F014 F016 silicon carbide | Seller: Zhengzhou HAIXU Abrasives | 98% SiC refractory sand F012 F014 F016 silicon carbide Product Introduction Black silicon carbi... | |
Black silicon carbide F014 F016 for ductile iron foundry | Seller: Zhengzhou HAIXU Abrasives | Black silicon carbide F014 F016 for ductile iron foundry Product Introduction Black silicon car... | |
Silicon carbide refractory fraction 1-3mm 1-5mm 1-10mm | Seller: Zhengzhou HAIXU Abrasives | Silicon carbide refractory fraction 1-3mm 1-5mm 1-10mm Product Introduction Black silicon carbi... | |
Refractories for Iron & Steel Industries | Seller: Jiabo Trading |