Aseptic filling machine
Aseptic filling machine
1. The main frame
The machine includes frame, the electrical control system , solenoid pilot actuated value , pneumatic components , membrane filter fan , ultravidet lamp , systems back to wine components .
2. Characteristics
This machine is specially used for filling 5L beer pop can .
The control unit adopts Siemens small PLC for controlling the whole process .
This machine can be used aseptic filling in the condition sterilized by ultravidet lamp .
The machine fills the beer barrel in the way of vacumm-pumping and CO2 pressure preparation .
3. Main technical parameter
Size of plate form 960mm×800mm
Height of plate form 800mm
Size of the machine 1000mm×1300mm×1530mm
Production capacity 50 ~ 70 keg per hour
Pressure of the beer 0.2------0.3Mpa
P ressure of the air 0.6------0.7 Mpa
Pressure of the CO2 0.2------0.3 Mpa
Pressure of the cylinder 0.3------0.5 Mpa
Voltage of the electricity AC220V 50HZ
Other supplier products
|
|
Automatic glass bottle-washing machine |
Automatic glass bottle-washing machine
1. Principal features
The machine contains the inner layer washing machine , the outside remove labeling m... |
|
|
beer filling machine |
1. Scope of application
It is mainly used in filling beer, soda drink, light sparkling wine, mineral water, etc.
2. Technical Features
GD Isobar... |
|
|
Vane-type diatomite filter machine |
Vane-type diatomite filter machine
1. There are two kinds of vane-type diatomite filter: vertical vane-type diatomite filter and level vane-type ... |
|
|
beer filling machine |
1. Scope of application It is mainly used in filling beer, soda drink, light sparkling wine, mineral water, etc. 2. Technical Features GD Isobaric ... |
|
|
Beer filling capping 2-in-1 unit machine |
1. Principal features It is used for filling and sealing various kinds of glass bottle with crown type bottle mouth for beer filling production lin... |
All supplier products
Same products
