Rotary Drum Shot Blasting Machine
Q3110 is a traditional drum type shot blasting machine. It USES the rotation of the drum to drive the workpiece to turn over. The high-speed rotating impeller throws the projectile into the workpiece that keeps turning inside the drum, so that the surface of the workpiece can be uniformly cleaned.
Q3110 drum shot blasting machine is suitable for casting, forgings, stamping parts and pre - cleaning of shot blasting before electroplating under 15kg, medium and small are not afraid of collision.
advantages
1. It can complete the functions of turning over, blasting and cleaning of workpiece;
2. Adopting the popular landless pit form, saving the construction cost of pit foundation;
3. The layout of the shot blasting chamber and the shot blasting device are determined by computer 3D dynamic projectile simulation, so that the projectile flow coverage area accurately covers the surface of the workpiece, and the projectile is thrown to the surface of the workpiece from all directions at the same time;
4. The use of the cantilever centrifugal shot blasting device with high projectile velocity from JF Company of Switzerland can significantly improve cleaning efficiency and obtain satisfactory cleaning quality;
5, the machine design concept is novel, compact structure, easy to use and maintain;
6. Small floor area, flexible layout, easy to meet the location of the projectile belt, beautiful appearance, delicate structure, convenient manufacture and maintenance, low noise;
7. Install the limited position device on the drum shot blasting device: when opening the top cover of the shot blasting device for maintenance, ensure that the equipment cannot be started, so as to protect the safety of the maintenance personnel;
8. The surface quality of the workpiece after shot blasting is Sa2 (meeting the international standard for visual inspection of the workpiece and magnetic particle inspection);
9. Fault alarm function of projectile circulation system.
In case of failure of any part of the system, the upper part of the system will automatically stop operation in case the projectile gets stuck and burns down the power unit.
Send product request
Other supplier products
 |
Sand Blasting Room | 1) Doors: The service door is built in welded profiles and has a closing in steel plates, and is internally coated with abrasion resistant rubber. ... |
 |
Foundry Green Sand Mixer | S11 series roller type sand mixer introduction: S11 series sand machine grinding wheel spring pressure technology, work inside and outside the scra... |
 |
Steel Pipe Inner Wall Shot Blasting Machine | Steel pipe inner wall special sandblasting equipment shot blasting machine Regardingsteelpipewithdiameterof16~600mm,weadoptsVtypeconveyorwhichhavea... |
 |
Foundry Hot Box Sand Core Shooter | Hot box coreshooter refers to the product cured by heating, usually heating on the mold, also known as hot core box mold, through the core shooting... |
 |
Crawler Belt Shot Blasting Machine | Q32 series crawler type shot blastng machine: This machine can be used to derust and streng then the surface of workpieces with mass productions.Th... |
