200 bar Pump Units
For parts deburring, castings cleaning, oil stains cleaning, pipelines cleaning surfaces cleaning, as well as food manufacture and pressure testing application.
Features：
Compact：Overall Dimensions in compact design, Required space limited
24-H Working：High frequent switching between high pressure and discharging;24 hours continuously working
Smart Control：Energy highly save，Remote pilot control and local operate both available
Technical Specification：
| Name | Model | Flow（L/min） | Pressure（bar） | Power（Kw） | Drive | Voltage（V） |
| High Pressure Pump Unit | STD-125160 | 0-163 | 0-125 | 37 | E-motor | 380/660 |
| High Pressure Pump Unit | STD-160120 | 0-127 | 0-160 | 37 | E-motor | 380/660 |
| High Pressure Pump Unit | STD-200100 | 0-104 | 0-200 | 37 | E-motor | 380/660 |
| High Pressure Pump Unit | STD-250080 | 0-80 | 0-250 | 37 | E-motor | 380/660 |
Send product request
Other supplier products
 |
Voltage Drop Tester for Automotive Wire Connectors | The voltage drop tester for automotive wire connectors is suitable for measuring the voltage drop at similar connection interfaces such as the pi... |
 |
Static Tensile Tester | Standard ASTM D3107Ensurereliable measurement of fabric elongation and tensile properties under controlled force applications. Product Advantages... |
 |
Vibration and Abrasion Resistance Tester for Automotive Wire-to-Wire | Standard ISO 6722: Road vehicles – Flexible cables for wiring harnesses SAE J1128: Low-voltage primary cable for automotive application... |
 |
Wire and cable smoke density tester | Product Introduction: STD AOTSI-NBS smoke density test chamber, also known as smoke dense bottom test chamber, the test method comes from the Nati... |
 |
Leather Seam Fatigue Tester | Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing fo... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
