Impact strength tester for car seat headrest
Applicable standards:
GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requirements and test methods" : This standard specifies the impact strength test method of automobile seat headrest in detail, including test equipment, test conditions, test steps and evaluation of test results.
GB 11550-1995 "Car seat headrest performance requirements and test methods"
Main parameters:
Impact energy: The tester should be able to simulate the impact energy of the head to the headrest when the car crashes, usually this energy value can be adjusted within a certain range to adapt to different test needs. For example, the impact energy of some testers can reach 20J or higher.
Impact velocity: Impact velocity refers to the speed at which the impact head hits the headrest, and this parameter is crucial for assessing the impact strength of the headrest. The tester should have an adjustable impact speed to adapt to different test standards and seat types. Common impact velocities range from 0-25km/h or higher.
Impact head type: The impact head is usually a spherical or hemispherical design to simulate the shape of the human head. The diameter and quality of the impact head should meet the requirements of the relevant standards to ensure the accuracy of the test. For example, some standard impact heads have a diameter of 165mm and a mass of 6.8kg.
Measurement accuracy: The tester should have a high measurement accuracy to ensure the accuracy of the test results. This includes the measurement accuracy of impact energy, impact velocity, acceleration and other parameters.
Test device: The test device shall include a stable support for fixing the car seat and headrest; A movable impact arm for carrying the impact head for impact testing; And the necessary sensors and data acquisition systems for real-time monitoring and recording of various parameters during the test.
Safety protection: The tester should have perfect safety protection measures, such as protective net, emergency stop button, etc., to ensure the safety and reliability of the test process.
Send product request
Other supplier products
 |
Dry heat shrinkage tester | Meet the standard GB/T9101-5.4-2017.GB/T9102-6.8-2016.GB/T19390-7.4.1-2023.ASTM D4974-2002. etc Scope of application It is used to test the dry ... |
 |
Geosynthetics Horizontal Penetration Tester | Scope of application: Used to determine the horizontal permeability of geosynthetics under constant head flow conditions. Under the conditions of ... |
 |
2800 bar Pump Units | For concrete removal, heat exchanger cleaning, road marking removal,aireport runway marking removal,pipleline repair, high pressure cutting and pre... |
 |
Aerospace Fluorine-containing Wire Dynamic Cutting Through Tester | Applicable standards: GJB773B and other standards in the annex G dynamic cutting test requirements Applicable industry: This instrument is the... |
 |
Universal Wear Tester(UWT)/Stoll Quartermaster | Application: Universal Wear Tester (UWT) is used to determines the wear and abrasion resistance of fabric used in clothing, footwear and industr... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
|
|
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
