Cylinder Automatic Brush Cleaning Machine
The fully automatic brush cleaning equipment for the pull cylinder adopts a telescopic cleaning brush and combines solvent spraying to achieve thorough cleaning of the cylinder wall and the bottom of the cylinder. The spindle speed is adjustable and the cleaning depth is adjustable. It is suitable for cleaning the inside of the pull cylinder, automatically adjusting the clamping positioning according to the size of the cylinder body, and is compatible with cylinder bodies of different specifications with a diameter of 500-1100mm.
Composition:
The fully automatic cleaning equipment for the pull cylinder consists of a fixed outer frame, an electric control host, an operation panel, a lifting device, a sealing upper cover, a cleaning spindle, an automatic positioning clamping device for the cylinder body, an openable and closable protective net, a three-dimensional cleaning head, a cleaning brush, etc.
Stainless Steel Industrial Cylinder Brush Cleaning Equipment (Also Known as Cylinder Brush Cleaner):
This specialized system is designed for cleaning three-dimensional mixing tanks, mobile cylinders, transfer cylinders, and circulation cylinders. The fully automated process integrates electrically controlled pumps, valves, and hydraulic mechanisms with rotating copper brushes and solvent spray systems. The triple-action mechanism achieves 360° no-blind-spot cleaning through cyclic rotation, combining mechanical scrubbing with chemical solvent action. Operator supervision is required for process monitoring and safety assurance during operation.
Cleaning Process Workflow
1. Simultaneous brush rotation and solvent spray cleaning
2. Solvent collection from cylinder bottom valve into filtration trough
3. Solvent recycling through diaphragm pump to storage tank
4. Magnetic pump repressurization for closed-loop cleaning cycle
5. Multi-stage filtration ensures solvent purity throughout the process
System Configuration
Three-dimensional high-pressure water pump (20-500 kg/cm²)
2. Copper brush cleaning with solvent spray nozzles
3. Tilted discharge structure for residue removal
4. Blowdown port cleaning assembly
5. ATEX-certified explosion-proof components
6. Hydraulic automatic lifting mechanism
7. Fixed external frame with safety guardrails
Send product request
Other supplier products
 |
Taber Abrasion Tester (Double-Head) | Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas... |
 |
Xenon Arc Weatherometer | IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce t... |
 |
Horizontal paper tensile strength testing machine | Product Introduction: G103C horizontal tensile strength tester adopts paper tensile strength software, which is a paper resistance tester for meas... |
 |
High-Power Lamp tube （1500W~12000W) | Applicable Standards High-power lamp tubes adhere to global safety and performance benchmarks, including: IEC 60598-1(Luminaires – Genera... |
 |
Auto wire abrasive belt drag grinding machine | Applicable standards: QC/T730-2005. SAE-J1128-2005. DIN 72551. IS06722. JASO D 618 and other standards Application: Suitable for detecting the... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
