Feeder
Peculiarity：
-
Standard paint cup capacity ≤1L. Feeding design saves time and labor by eliminating back-and-forth pouring, enabling continuous operation and improving efficiency.
- Multiple capacities available:2L/5L/10L/30L/40L/60L/80L/100L/120L/150L/200L/500L(custom sizes available).
- Customizable functions: Dual-lip high-pressure design, stainless steel material, feed port, inspection window, liquid level tube, brake fixing frame.
- Adjustable viscosity and paint output. Capable of spraying high-concentration coatings to save solvents. Easily switch colors or clean without replacing the inner bucket.
- Compatible with standard 20L (5-gallon) square/round buckets for direct use in TONSON’s 30L feeder, saving time and materials.
- Copper lid design: Safe and durable. Movable sealing cover prevents solvent leakage and reduces hazards.
- T-Type Auto High-Speed Feeder equipped with pneumatic motor stirring. Long lifespan, stable performance, prevents sedimentation, and ensures consistent color mixing.
Uses:
shoes, wood, rattan (easy to fill pores), white paste, tires, PVC, plastic paint, ink, cutting, leather, high viscosity liquid paint, baking paint, Luang, non-woven fabric, strong glue, mold, release agent, automotive rust prevention, chemical, paint engineering, electronic semi-thin body and other use of this machine.
| Model | Capacity (L) | Weight (kg) | Dimensions (cm) Length x Width x Height | Inlet Thread Size | Mixing Method | Max Pressure Limit |
|---|---|---|---|---|---|---|
| STD-T-10L | 10 | 13 | 30x30x52 | 1/4"x1" | Pneumatic Motor 1/4" x2 Auto Mixing | 3.5 kg/cm² |
| STD-T-30L | 30 | 25.5 | 43x43x73 | |||
| STD-T-40L | 40 | 30 | 43x43x88 | |||
| STD-T-60L | 60 | 35 | 57x57x88 | |||
| STD-T-80L | 80 | 38.5 | 57x57x103 | 1/4"x1" | ||
| STD-S-10L | 10 | 11 | 30x30x49 | |||
| STD-S-30L | 30 | 23.5 | 43x43x73 | 1/4"x2" | S-Type Manual Mixing | |
| STD-S-40L | 40 | 28 | 43x43x88 | |||
| STD-S-60L | 60 | 33 | 57x57x88 | |||
| STD-S-80L | 80 | 36.5 | 57x57x103 | |||
| STD-P-2L | 2 | 1 | 14x14x35 | 1/4"x1" | P-Type Anti-Sediment Design | 3.5 kg/cm² |
| P-10L | 10 | 10.5 | 30x30x47 | 1/4"x2" | ||
| P-30L | 30 | 23.5 | 43x43x73 | |||
| P-40L | 40 | 28 | ||||
| P-60L | 60 | 33 | 57x57x88 | |||
| P-80L | 80 | 36.5 | 57x57x103 | |||
| High-Thickness Wall Bucket (Optional) | Max Pressure Limit:7 kg/cm² | |||||
| Inner Bucket Sizes: | ||||||
| 10L: ②19x23 cm | 30L: 30x37 cm | 40L: ②30x49 cm | 60L: 36x49 cm | 80L: 36x65 cm |
Send product request
Other supplier products
 |
Glow wire tester | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
 |
Parts Valves Tube Cleaning | A robot system to clean parts, valves and tubes. By high pressure water tools together the intelligent programming, the system can make the clean ... |
 |
Color fastness tester for ironing sublimation-QINSUN | Color fastness tester for ironing sublimation - Testing instrument for ironing color fastness of materials G247B Color fastness tester for ironing... |
 |
(Changan) Automobile wire and wire bending testing machine | Standard: DIN 51211 and ISO 7801 Scope of application: Changan Automobile "JT automobile low-voltage wire technical conditions" standard Techni... |
 |
Ignition temperature tester | Introduction The Minimum Ignition Temperature Tester is a way of testing the sensitivity of the ignition that the dust cloud is in the heated envi... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
