BKNET-0102 Welded Pipe Eddy Current Flaw Detector

• 

Eddy current weld inspectionis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.

Eddy current testing of weldsis a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.

Eddy current weld testingis a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.

BKNET-012 NDT weld testing equipmentis used for on-line and off-line inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.

BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance

BKNET-0102 Welded Pipe Eddy Current Flaw Detector Features:

High precision end and end-to-tail signal removal

High precision real-time, delayed alarm output

Fast digital／analog electronic balance

Memory track delay blanking function

Non-equal amplitude phase／amplitude alarm domain

Remote automatic help system

Synchronous alarm output for internal and external clock control

As one of non destructive testing equipment suppliers, we can offer types of eddy current testingproducts for sale, if you have needs, please contact us.

Другие товары поставщика

	BKNET-999H Copper Tube Eddy Current Flaw Detector	BKNET-999H Copper Tube Eddy Current Flaw Detector brief Eddy current testing is a non-destructive testing technique in which an alternating curre...
	Steel Bar Testing	The steel bar is rolled by a rolling mill and produce both surface defects and internal defects during the rolling process. The internal defect is ...
	BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator	Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ...
	Magnetic Flux Leakage Testing Equipment	Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leakage is a magnetic method of nond...
	Eddy Current Testing Equipment	Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects...

Похожие товары

	C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower	Продавец: Greentech International (Zhangqiu) Co., Ltd	Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif...
	Common Rail injector control valve F00VC01303	Продавец: China Lutong Part Plant	Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common...
	Common Rail injector control valve F00VC01200	Продавец: China Lutong Part Plant	Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common...
	Injector Control Valve Plate 24#	Продавец: China Lutong Part Plant	Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto...
	Injector Control Valve Plate 12#	Продавец: China Lutong Part Plant	Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto...