Airflow Flash Dryer(Cassava Drying Machine)
Features of Airflow Flash Dryer(Cassava Drying Machine)
The starch factory at present normally adopt airflow drying (also called flash drying), the whole process time is completed in an instant, so the internal moisture of the starch granules have been dry before gelatinization, the pasting or degradation phenomenon will not occur. Airflow drying is concurrent flow drying process, namely, the concurrent flow of wet powder material and the heat flow, consists of heat transfer and mass transfer process. When wet starch with the hot air in contact, hot air transfer heat to the surface of the wet starch, again from surface to interior, the process is the heat transfer process; At the same time, the moisture in wet starch diffusion from the material inside to the surface of starch by liquid or gaseous, and the diffusion into the hot air from the starch surface through the gas film, it is a mass transfer process. By the high-temperature air and wet starch balanced heat exchanging in the drying tube, the drying starch become dry powder, and then packing and warehousing after cooling.
Processing Capacity: 100-2000Kgs/hour
Application Scope: Cassava starch and flour drying
Product Introduction: Airflow flash dryer, cassava flash dryer, cassava flour drying machine for cassava starch and flour processing
Product Application of Airflow Flash Dryer
Widely used for the drying in starch, modified starch, medicine, food, chemical industry etc particle materials.
Technical Parameters of Airflow Flash Dryer
|
Modelnumber |
Outputyield |
Power |
Voltage |
Finalwatercontent |
Material |
Coverarea |
|
GD-HG-300 |
300kg/hour |
13kw |
380V/50Hz |
≤13% |
Stainlesssteel |
30-40m2 |
|
GD-HG-500 |
500kg/hour |
22kw |
380V/50Hz |
≤13% |
Stainlesssteel |
30-40m2 |
|
GD-HG-1000 |
1000kg/hour |
30kw |
380V/50Hz |
≤13% |
Stainlesssteel |
40-50m2 |
|
GD-HG-2000 |
2tons/hour |
60kw |
380V/50Hz |
≤13% |
Stainlesssteel |
70-80m2 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Cassava Presser | Cassava Presser ZTZY screw progressive extrusion separator is a continuous operation press separator for organic material extrusion liquid and i... |
 |
Hydraulic Dewatering Press | Hydraulic Dewatering Press sava processing machine Features of Hydraulic Dewatering Press Processing Capacity: 100-500kgs/hourApplication Scope: C... |
 |
Dewatering and Drying System | The section of dewatering and drying has come to final steps of cassava processing, the vacuum dehydrator can remove as much moisture as possible a... |
 |
Sweet Potato Starch Machine | Features of potato powder making machine Sweet Potato Starch Machine Sweet Potato Starch Process Description and Flowchart: Goodway has been conti... |
 |
Cassava Chips Machine 2019 | Cassava Chips Processing Description and Flowchart: Cassava chips are one kind of chips or slices made from fresh cassava roots, as snacks or anim... |
Похожие товары
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Продавец: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Продавец: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Продавец: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
