Metal Dome Type Splice Closure for Opgw Cable
COMPONENT
inner armor rods, outer armor rods, rubber clamp piece, cover shell, right-angle hanging loop, U-shaped hanging loop, bolt, nut, gasket etc.
CHARACTERISTIC
1. Stress is distributed equally, without stress focus. It can improve the intensity of cable line installation point and better protect the cable.
2. It has higher supporting capability of dynamic stress. The double-layer structure has better protection to the operating cable that has imbalanced load for long time. Its grip power can reach 10-20% of the pulling resisting intensity of the optical cable.
3. The greater interface with the optical cable and the gentle rubber clamp piece reduce the wearing out and improve self-damping.
4. The flat surface and the smooth shape of end improve the discharging voltage and reduce the loss of electric power.
5. The superior aluminum alloy material has higher comprehensive mechanical performance and cauterization resisting capability, and extends the lifetime usage.
6. Easy installation; no need for special tools, no need for maintenance.
CONDITIONS FOR THE USAGE
Poles/ towers with corner angle of less than or equal to 25°in straight lines. The angle of single-side suspensions is between 15- 18°.
INTENSITY
70kN, 100kN,
Description
| Model |
Span(m) |
Length of Inner Armor Rods(mm) |
Length of Outer Armor Rods(mm) |
Estimated Weight(KG) |
Color |
OXC-* *
|
9.5-11.5 |
1800 |
1200 |
3.9 |
Red |
| 11.6-14.0 |
2000 |
1400 |
4.2 |
Red |
| 14.1-16.0 |
2200 |
1600 |
4.5 |
Red |
| 16.1-20.0 |
2600 |
2000 |
5.1 |
Red |
NOTE**representing the outer diameter of the optical cable (mm).
Другие товары поставщика
|
|
Metal Dome Type Splice Closure for Opgw Cable |
Tension Set for Short Span ADSSCOMPONENTsingle layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc.CHARACTERISTICSimpl... |
|
|
Cable Guy Grip Dead End |
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for ... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
FUNCTIONIt fixes the down-leading or up-leading cable from the poles/towers to the poles/towers, preventing shaking, and avoiding attrition.CONDIT... |
|
|
Overhead Line Fittings for Electric Power |
MaterialDead-ends:High-tensile galvanized steel.ApplicationSuited for the full tensioning of groundwire or staywire on transmission and distributr... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
COMPONENTinner armor rods, outer armor rods, rubber clamp piece, cover shell, right-angle hanging loop, U-shaped hanging loop, bolt, nut, gasket e... |
Все товары поставщика
Похожие товары
