Metal Dome Type Splice Closure for Opgw Cable
COMPONENT
inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.
CHARACTERISTIC
1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well.
2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force.
3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable.
CONDITIONS FOR THE USAGE
1. Terminal poles/towers;
2. Poles/towers with corner angles greater than 25°
3. Conjoint poles/towers of the optical cables or poles/towers with larger differences in terms of height.
INTENSITY
According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied.
Description
| Model |
Grip(KN) |
Suggested Span(m) |
Length of Inner Armor Rods(mm) |
Length of Outer Armor Rods(mm) |
Estimated Weight (KG) |
Color |
| ANZ-16-* * |
16 |
100 |
1300 |
1000 |
2.7 |
Yellow |
| ANZ-25-* * |
25 |
101 -200 |
1700 |
1300 |
3.4 |
Yellow |
| ANZ-30-*# |
30 |
201 -300 |
1900 |
1500 |
3.9 |
Yellow |
| ANZ-40-*# |
40 |
301 -400 |
2100 |
1700 |
4.1 |
Yellow |
| ANZ-50-*# |
50 |
401 -500 |
2300 |
1900 |
4.5 |
Yellow |
| ANZ-60-*# |
60 |
501 -600 |
2200 |
1700 |
4.8 |
Yellow |
| ANZ-70-*# |
70 |
601 -800 |
2700 |
2200 |
5.0 |
Yellow |
| ANZ-80-*# |
80 |
801 -1000 |
2800 |
2400 |
5.5 |
Yellow |
NOTE**representing the outer diameter of the optical cable (mm).
Другие товары поставщика
|
|
Metal Dome Type Splice Closure for Opgw Cable |
COMPONENTinner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.CHARACTERISTIC1. Stress is distributed... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
FUNCTIONThe armor rods can protect the optical cable by preventing the vibration damper aluminum clamp from nipping directly onto the OPGW cables t... |
|
|
Cable Guy Grip Dead End |
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for ... |
|
|
Overhead Line Fittings for Electric Power |
Vibration Dampers for OPGW (4D)COMPONENTzincification hammerhead, zincification steel armor rods, aluminum alloy clamp, stainless steel bolt etc.FU... |
|
|
Cable Top Ties/Side Ties |
FunctionDistribution ties are designed for securing conductors in the top groove of rigid insulators vertically mounted.This specific distribution ... |
Все товары поставщика
Похожие товары
