Strain Clamp / Dead End Clamp for ADSS
COMPONENT
inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.
CHARACTERISTIC
1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well.
2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force.
3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable.
CONDITIONS FOR THE USAGE
1. Terminal poles/towers;
2. Poles/towers with corner angles greater than 25°
3. Conjoint poles/towers of the optical cables or poles/towers with larger differences in terms of height.
INTENSITY
According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied.
Description
| Model |
Grip(KN) |
Suggested Span(m) |
Length of Inner Armor Rods(mm) |
Length of Outer Armor Rods(mm) |
Estimated Weight (KG) |
Color |
| ANZ-16-* * |
16 |
100 |
1300 |
1000 |
2.7 |
Yellow |
| ANZ-25-* * |
25 |
101 -200 |
1700 |
1300 |
3.4 |
Yellow |
| ANZ-30-*# |
30 |
201 -300 |
1900 |
1500 |
3.9 |
Yellow |
| ANZ-40-*# |
40 |
301 -400 |
2100 |
1700 |
4.1 |
Yellow |
| ANZ-50-*# |
50 |
401 -500 |
2300 |
1900 |
4.5 |
Yellow |
| ANZ-60-*# |
60 |
501 -600 |
2200 |
1700 |
4.8 |
Yellow |
| ANZ-70-*# |
70 |
601 -800 |
2700 |
2200 |
5.0 |
Yellow |
| ANZ-80-*# |
80 |
801 -1000 |
2800 |
2400 |
5.5 |
Yellow |
NOTE**representing the outer diameter of the optical cable (mm).
Other supplier products
|
|
Strain Clamp / Dead End Clamp for ADSS |
COMPONENTinner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.CHARACTERISTIC1. Stress is distributed... |
|
|
Down-Leading Clamp for ADSS/OPGW |
FUNCTIONIt fixes the down-leading or up-leading cable from the poles/towers to the poles/towers, preventing shaking, and avoiding attrition.CONDIT... |
|
|
Cable Margin Supporters for ADSS |
Cable Margin Supporters for ADSS (AYLJ)The cable margin supporter is used for extra cables when emplacing cable connective ends, Usually, one cab... |
|
|
Tension Set for Short Span ADSS |
Tension Set for Short Span ADSSCOMPONENTsingle layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc.CHARACTERISTICSimpl... |
|
|
Overhead Line Fittings for Electric Power |
MaterialDead-ends:High-tensile galvanized steel.ApplicationSuited for the full tensioning of groundwire or staywire on transmission and distributr... |
All supplier products
Same products
