Overhead Line Fittings for Electric Power
Material
Dead-ends:
High-tensile galvanized steel.
Application
Suited for the full tensioning of groundwire or staywire on transmission and distributribution lines.
Selection chart
| Model |
Sectional area(mm²) |
Outside diameter(mm) |
Clamplength(mm) |
Clampweight(kg) |
Fittings |
| NL-25G |
25 |
6.60 |
640 |
0.2 |
QH-7 |
| NL-35G |
35 |
7.80 |
720 |
0.3 |
|
| NL-50G |
50 |
9.00 |
910 |
0.5 |
|
| NL-70G |
70 |
11.00 |
1020 |
0.8 |
QH-10 |
| NL-95G |
95 |
12.50 |
1340 |
1.7 |
QH-12 |
| NL-100G |
100 |
13.00 |
1340 |
1.7 |
|
| NL-120G |
120 |
14.00 |
1460 |
2.2 |
QH-16 |
| Note：The meaning of the letters and numbersin the model no.：N-strain clamp；L-spiralpreformed；after“-”is the suitable steel strandtype；The guy wire is the galvanized steel cables(YB/T5004-1993). |
Другие товары поставщика
|
|
Cable Top Ties/Side Ties |
FunctionDistribution ties are designed for securing conductors in the top groove of rigid insulators vertically mounted.This specific distribution ... |
|
|
Cable Guy Grip Dead End |
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for ... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
Tension Set for Short Span ADSSCOMPONENTsingle layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc.CHARACTERISTICSimpl... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
Cable Margin Supporters for ADSS (AYLJ)The cable margin supporter is used for extra cables when emplacing cable connective ends, Usually, one cab... |
|
|
Overhead Line Fittings for Electric Power |
Vibration Dampers for OPGW (4D)COMPONENTzincification hammerhead, zincification steel armor rods, aluminum alloy clamp, stainless steel bolt etc.FU... |
Все товары поставщика
Похожие товары
