CSA Expansive Additive

CSA expansive additive description:

The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration. It is developed to reduce and compensate the hydraulic shrinkage of cement based construction products. Its performance is similar to Denka CSA #20, which is now widely used in the formulation of different mortars in Europe countries.

As a fire brick supplier, we offer two types of these CSA expansive additives, the main specifications are according to JC476-2001

CSA expansive additive technical data:

Parameters		CSAExpansiveadditiveI	CSAExpansiveadditiveII
MgO%		≦5.0	≦5.0
Watercontent%		≦3.0	≦3.0
TotalAlkali%		≦0.75	≦0.75
Chlorideion%		≦0.05	≦0.05
SpecificSurfaceArea		≧200m2/kg	≧200m2/kg
Fineness		≦12	≦12
Settingtime	Initialsettingtime	≧0:45	≧0:45
	Finalsettingtime	≦10:00	≦10:00
LimitedExpansiveRate(%)	7daysinwater	≧0.025	≧0.05
	21daysinair	≧-0.020	≧-0.010
Compressivestrength（MPa）	7days	≧25	≧25
	28days	≧45	≧45
Bendingstrength（Mpa）	7days	≧4.5	≧4.5
	28days	≧6.5	≧6.5

CSA expansive additive performance:

(1)As making shrinkage compensated concrete, if the ratio of reinforcement is 0.2%-1.0%, the limited expansive rate will be in the range of 0.02-0.04%, and a prestress of 0.2-0.7Mpa exists in the concrete.

(2)Comparing with the concrete without Expansive Additive, in the condition of defined mixing amount, the free strength of the concrete with Expansive Additive is roughly equal to that of concrete without Expansive Additive. The limited strength is 10~15% higher than free strength.

(3)The impermeability grade of mortar and concrete can reach over S30. The elastic ratio closes to that of common concrete.

(4)Anti freezing: D150.

(5) Sulphate resistance of concrete is increased. No pollution to water.

CSA expansive additive application:

(1)For structural self-waterproofing construction. Effectively preventing cracking or leakage of concrete.

(2)To extend the space length of post casting zone of cast-in-place overlength structure.

(3)To control the crack producing result of temperature difference in large sized structural concrete.

(4)For rigid roofing.

(5) Making non-shrinkage cements.

CSA expansive additive packing:

By 50kgs bags or jumbo bags.

CSA expansive additive Storage:

Store in dry place, guard against damp. Warranty period: 1 year.

For the special cement products, it includes calcium aluminate cements (CA cement)and calcium sulfoaluminate cements (CSA cement/CSA binder). The CSA cement is more and more imported by GRC manufacturers and dry mix mortars manufactures because of its higher performance compare to the Portland cement such as fast setting time, rapid hardening and high strength in 3 days.

Другие товары поставщика

	Clay Insulation Brick	Thermal Insulation Bricksare high porosity refractories with low thermal conductivity and high porosity (no less than 45%) used to reduce heat loss...
	Fire Clay Bricks	Main introduction of Fire clay bricks Fire clay bricks refer to refractory bricks containing Al2O3 more than 38%, which is made of high grade bauxi...
	Thermal Insulation Products	Insulating materials introduction material is a material that reduces or prevents the transmission of heat or sound or electricity. We deal with Cl...
	CSA Cement	What is CSA Cement CSA(Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setti...
	Calcium Aluminate Cement	Description of Calcium aluminatecement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temp...

Все товары поставщика

Похожие товары

	порошок ГПМЦ	Продавец: Йида ГПМЦ	Гидроксипропилметилцеллюлоза (ГПМЦ) производится из очищенного хлопка после измельчения, затем ре...
	UHMWPE Plant	Продавец: Hubei Sanli Fengxiang Technology Co., Ltd	Ultra high molecular weight polyethylene (hereinafter called as UHMWPE) is a linear structural po...
	Formic acid production technology	Продавец: Hubei Sanli Fengxiang Technology Co., Ltd	There are totally four production processes forformic acid production, incl. Sodium Formate Proce...
	PPC Plant	Продавец: Hubei Sanli Fengxiang Technology Co., Ltd	PPC (polypropylene carbonate)is acompletely biodegradable environment-friendly plastic synthesize...
	Buy Caluanie Muelear Ship in Europe	Продавец: CALUANIE MUELEAR OXIDIZE	Caluanie (Oxidative Partition Thermostat, Heavy Water) Appearance: Transparent liquid. Smell: Ord...