CSA Expansive Additive
CSA expansive additive description:
The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration. It is developed to reduce and compensate the hydraulic shrinkage of cement based construction products. Its performance is similar to Denka CSA #20, which is now widely used in the formulation of different mortars in Europe countries.
As a fire brick supplier, we offer two types of these CSA expansive additives, the main specifications are according to JC476-2001
CSA expansive additive technical data:
Parameters |
CSAExpansiveadditiveI |
CSAExpansiveadditiveII |
|
MgO% |
≦5.0 |
≦5.0 |
|
Watercontent% |
≦3.0 |
≦3.0 |
|
TotalAlkali% |
≦0.75 |
≦0.75 |
|
Chlorideion% |
≦0.05 |
≦0.05 |
|
SpecificSurfaceArea |
≧200m2/kg |
≧200m2/kg |
|
Fineness |
≦12 |
≦12 |
|
Settingtime |
Initialsettingtime |
≧0:45 |
≧0:45 |
Finalsettingtime |
≦10:00 |
≦10:00 |
|
LimitedExpansiveRate(%) |
7daysinwater |
≧0.025 |
≧0.05 |
21daysinair |
≧-0.020 |
≧-0.010 |
|
Compressivestrength(MPa) |
7days |
≧25 |
≧25 |
28days |
≧45 |
≧45 |
|
Bendingstrength(Mpa) |
7days |
≧4.5 |
≧4.5 |
28days |
≧6.5 |
≧6.5 |
CSA expansive additive performance:
(1)As making shrinkage compensated concrete, if the ratio of reinforcement is 0.2%-1.0%, the limited expansive rate will be in the range of 0.02-0.04%, and a prestress of 0.2-0.7Mpa exists in the concrete.
(2)Comparing with the concrete without Expansive Additive, in the condition of defined mixing amount, the free strength of the concrete with Expansive Additive is roughly equal to that of concrete without Expansive Additive. The limited strength is 10~15% higher than free strength.
(3)The impermeability grade of mortar and concrete can reach over S30. The elastic ratio closes to that of common concrete.
(4)Anti freezing: D150.
(5) Sulphate resistance of concrete is increased. No pollution to water.
CSA expansive additive application:
(1)For structural self-waterproofing construction. Effectively preventing cracking or leakage of concrete.
(2)To extend the space length of post casting zone of cast-in-place overlength structure.
(3)To control the crack producing result of temperature difference in large sized structural concrete.
(4)For rigid roofing.
(5) Making non-shrinkage cements.
CSA expansive additive packing:
By 50kgs bags or jumbo bags.
CSA expansive additive Storage:
Store in dry place, guard against damp. Warranty period: 1 year.
For the special cement products, it includes calcium aluminate cements (CA cement)and calcium sulfoaluminate cements (CSA cement/CSA binder). The CSA cement is more and more imported by GRC manufacturers and dry mix mortars manufactures because of its higher performance compare to the Portland cement such as fast setting time, rapid hardening and high strength in 3 days.
在线联系供应商
Other supplier products
CSA Expansive Additive | CSA expansive additive description: The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of c... | |
products | Special cements are cements that serve some specific function such as altering the setting or hardening behavior of a concrete, producing different... | |
Amorphous Calcium Aluminate | Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content ... | |
High Alumina Cement | What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calciu... | |
CSA Binder | CSA BinderIntroduction: Calcium Sulfoaluminate binder is pure CSA clinker that grinded without any gypsum. It is a hydraulic cementitious materi... |
Same products
Copper Polishing Slurry | 卖方: Changsha Kona Fine Chemical Co.,Ltd | According to the characteristics of copper material and high requirements of the 3C fabricate, Ko... | |
Copper-Covered Ceramic Substrate Polishing Slurry | 卖方: Changsha Kona Fine Chemical Co.,Ltd | Copper is a good conductor. Resin substrates, metal substrates and ceramic substrates all need to... | |
Cerium Oxide Slurry for Quartz Glass | 卖方: Changsha Kona Fine Chemical Co.,Ltd | As a cerium oxide polishing powder manufacturer, Kona provides polishing slurry with cerium oxide... | |
A-Plane Sapphire Colloidal Silica | 卖方: Changsha Kona Fine Chemical Co.,Ltd | Kona series Sapphire Polishing Slurry developed for kinds of Sapphire products, such as sapphire ... | |
Metal Mirror Polishing Slurry | 卖方: Changsha Kona Fine Chemical Co.,Ltd | Kona Metal Mirror Finish Polishing Slurry is an advanced blend of abrasive particles and high-gra... |