Hail impact tester
The test machine can confirm and verify that the module can withstand the impact of hail, and is suitable for the hail impact test in IEC61215. The equipment can achieve multi-point continuous accurate positioning, and is not limited by weather conditions. The hail impact tester is a universal testing platform to verify whether the components can withstand hail impact.
Working principle:
The air compressor compresses the air to the gas storage tank. The outer pressure gauge and the inner diameter *** pipe are connected with an air valve, which is controlled by a large solenoid valve.
Photoelectric speed measuring device is installed at the front end of *** tube. Adjust the pressure gauge to make the ice hockey meet the standard impact speed.
Make ice hockey mould with inner diameter of 25mm. The ice hockey ball is placed in the *** tube, the solenoid valve is opened, and the compressed air pushes the ice hockey ball to impact the photovoltaic module at a speed of 23 m/s. After being impacted by ice hockey balls, the quality of the components can be judged by appearance inspection, maximum power test and insulation resistance test.
System composition:
1、Pneumatic launcher: The power source is air. A gas storage device is needed to store the air-conditioning pressure and adjust the speed of ice hockey launching in the launching tube by adjusting the change of air pressure. Pneumatic launcher needs hardware cooperation, including high-pressure air source, pressure regulating equipment (pressure regulating valve and cylinder), gas pipe and electromagnetic valve.
2、Mechanical moving device: The computer controls the mechanical transmission device to change the moving position of the *** tube, and uses infrared fixed point to aim. The mechanical movement is realized by stepper motor drive mode. The stepper motor has the advantages of fast and accurate positioning. It can complete the positioning requirements in a very short time. The positioning accuracy is less than 1 mm, and the cumulative error of the experiment is less than 5 mm, which is far less than the requirement of IEC standard that the specified position deviation is not more than 10 mm, so as to ensure the reliability of the experiment.
3、Sample fixator: According to the size of the sample, the mechanical movable device and sample fixator are designed. The standard size 2000*1350 (L*H) can cover the effective surface of the component under test within the size 2000*1350.
4、Velocity testing device: The distance between the two photoelectric sensors is 50 cm before the transmitter, and the velocity is obtained by v=s/t, which can be displayed in real time and changed when the next sample is measured. The speed testing device consists of three parts: detection sensor, high-speed response module and software module. The system uses stable photoelectric sensors and programmable controllers to achieve, and provides HMI human-machine interface as the operation terminal, with external printers to form experimental data reports.
More product information sources：
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Helmet impact testing machine | Purpose: This testing machine is used to test the penetration and collision resistance of motorcycle helmet, and it is a special testing equipment... |
 |
Helmet crash testing machine | This test machine adopts Panasonic servo system drive and new humanized software design, simple operation software and electronic stability program... |
 |
Dongguan Hongtu Instrument Co.,Ltd | Dongguan HONGTU Instrument Co., Ltd, was founded in 2009 in Dongguan, China. HOTOTECH was specialized in helmets, PV, breathing mask, sports prote... |
 |
Solar panel environmental chamber | Solar panels are devices that absorb sunlight and convert solar radiation into electricity directly or indirectly through photoelectric or photoche... |
 |
Helmet testing equipment | The characteristics of the helmet: No.1, shock absorption There is a separation belts inside the fire helmet. According to the Chinese national s... |
Похожие товары
 |
Контроль и установка контейнера | Продавец: 821678 | Guangdong Inspection and Testing Co., Ltd. является одним из ведущих сторонних поставщиков услуг ... |
 |
Контроль и установка контейнера | Продавец: 821678 | Guangdong Inspection and Testing Co., Ltd. является одним из ведущих сторонних поставщиков услуг ... |
 |
CLONED CARDS+ FRESH DUMPS+PIN, | Продавец: cardersdrives | Sell Fresh Dumps CCV+FULLZ GIFTCARDS Credit Cards CLONECARDS ALL COUNTRY LIVE 100%Dumps CVV Fresh... |
 |
AFEN европейский торговый автомат с лапшой для чашки горячего и холодного кофе с монетой | Продавец: Hunan Aifeng Vending Machine Co., Ltd. | Model AF-60GC4 Name Cup noodle vending machine Capacity ... |
 |
AFEN 24-часовой автоматический аптечный магазин самообслуживания, медицинский шкафчик, торговый автомат | Продавец: Hunan Aifeng Vending Machine Co., Ltd. | Model AF-ZK(22SP)+AF-BLH-19S Dimension H:1940mmW:397mmD:320mm Power AC100V-240... |
