Wave Soldering Machine

SMT Wave soldering is to make the welding surface of plug-in board contact with high-temperature liquid tin directly to achieve the purpose of welding. The high-temperature liquid tin maintains an inclined surface, and a special device makes liquid tin form a wave-like phenomenon, so it is called "wave soldering". Its main material is solder bar.

After the circuit board enters the wave crest welder through the conveyor belt, it passes through some form of the flux-coated device, where the flux is applied to the circuit board by wave crest, foam or spray. Since most flux solders must reach and maintain an activation temperature to ensure complete penetration of the solder joint, the circuit board passes through a preheating zone before entering the crest groove. Preheating after applying the flux can gradually raise the temperature of the PCB and activate the flux, which can also reduce the thermal shock when the assembly enters the wave crest. It can also be used to vaporize any moisture that might be absorbed or dilute the solder's carrier solvent, and if these things are not removed, they will boil over the wave crest and cause the solder to sputter, or steam is left in the solder to form a hollow solder or sand hole.

In addition, because of the large heat capacity of the double-panel and multi-panel, they require higher preheating temperature than the single panel.

Wave soldering machine for sale has a new welding technology with the enhancement of people's awareness of environmental protection. Previously, tin-lead alloys were used, but the lead is a heavy metal that can do a lot of damage to the human body. A lead-free process was developed using * tin-silver-copper alloy * and special flux, and the welding temperature required higher preheating temperature.

In most products that do not require miniaturization and high power, perforation (TH) or hybrid technology circuit boards, such as television sets, home audio equipment, and digital set-top boxes, are still used with perforated components, requiring wave soldering. From a technical point of view, the wave soldering machine for sale can only provide a few of the most basic equipment operation parameters adjustment.

At present, We mainly focus on the pick and place machine china, providing the overall solution of SMT and whole assembly line equipment, mainly including the printer machine, Insertion machine, reflow oven, wave soldering machine, AOI and other series products. Our products are widely used in Household Appliances, Driver, High-end LED, Intelligent Toys, Automotive, Consumer Electronics, and aviation electronic industry, etc.

Другие товары поставщика

	MJ-PM 400 Full Automatic Vision Printer for PCBA Board, Auto Stencil Solder Paste Printer	Suspended print head with the programmable pressure automatic adjustment system. Standard stainless steel squeegee, unique design to improve the l...
	MJ-L10 Large Lead-Free Hot Air 10 Temperature Zones Reflow Oven, SMT Reflow Soldering Machine for LE	Many temperature wave choice for you: Memory eight kinds of temperature parameter waves can be provided as choice, and establish to move to heat an...
	High Quality Yamaha Feeder Parts Electric Feeders SS 12mm	Features Now it has been developed into high-precision electric type, which is compared with traditional structure mode, with higher transmission a...
	MJ-M8C SMT Infrared Hot Air And Cool Air 8 Zones Reflow Soldering Oven For Led Light, PCBA	Features Special furance liner design, with good heat preservation ability and low power consumption. The quality high-temperature high-speed motor...
	MOJE M612T High Accuracy And High Efficient Flexible SMT Pick And Place Machine With Good Stability	M612T is widely used in electronic circuits, integrated circuits, instruments and meters, printed circuit, computer manufacturing, mobile communica...

Похожие товары

	Machine Bolt	Продавец: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD	Our inventory encompasses stainless steel machine boltscrafted from high-quality materials, inclu...
	Hot Line Tap Clamp	Продавец: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD	China hot line tap clampis a tool used for connecting and fixing electrical equipment. In power s...
	Glass Electrical Insulator	Продавец: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD	An insulating device made of glass called a glass powerline insulatorsis used to support and shie...
	Fuse Cutout	Продавец: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD	Fuse cutouts, also called cutout switch, are used in primary overhead feeder lines and taps to sa...
	Eye Nut	Продавец: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD	Eye nuts are internally threaded fasteners that are frequently used in the lifting and rigging in...