Wave Soldering Machine
SMT Wave soldering is to make the welding surface of plug-in board contact with high-temperature liquid tin directly to achieve the purpose of welding. The high-temperature liquid tin maintains an inclined surface, and a special device makes liquid tin form a wave-like phenomenon, so it is called "wave soldering". Its main material is solder bar.
After the circuit board enters the wave crest welder through the conveyor belt, it passes through some form of the flux-coated device, where the flux is applied to the circuit board by wave crest, foam or spray. Since most flux solders must reach and maintain an activation temperature to ensure complete penetration of the solder joint, the circuit board passes through a preheating zone before entering the crest groove. Preheating after applying the flux can gradually raise the temperature of the PCB and activate the flux, which can also reduce the thermal shock when the assembly enters the wave crest. It can also be used to vaporize any moisture that might be absorbed or dilute the solder's carrier solvent, and if these things are not removed, they will boil over the wave crest and cause the solder to sputter, or steam is left in the solder to form a hollow solder or sand hole.
In addition, because of the large heat capacity of the double-panel and multi-panel, they require higher preheating temperature than the single panel.
Wave soldering machine for sale has a new welding technology with the enhancement of people's awareness of environmental protection. Previously, tin-lead alloys were used, but the lead is a heavy metal that can do a lot of damage to the human body. A lead-free process was developed using * tin-silver-copper alloy * and special flux, and the welding temperature required higher preheating temperature.
In most products that do not require miniaturization and high power, perforation (TH) or hybrid technology circuit boards, such as television sets, home audio equipment, and digital set-top boxes, are still used with perforated components, requiring wave soldering. From a technical point of view, the wave soldering machine for sale can only provide a few of the most basic equipment operation parameters adjustment.
At present, We mainly focus on the pick and place machine china, providing the overall solution of SMT and whole assembly line equipment, mainly including the printer machine, Insertion machine, reflow oven, wave soldering machine, AOI and other series products. Our products are widely used in Household Appliances, Driver, High-end LED, Intelligent Toys, Automotive, Consumer Electronics, and aviation electronic industry, etc.
在线联系供应商
Other supplier products
 |
MJ-L10 Large Lead-Free Hot Air 10 Temperature Zones Reflow Oven, SMT Reflow Soldering Machine for LE | Many temperature wave choice for you: Memory eight kinds of temperature parameter waves can be provided as choice, and establish to move to heat an... |
|
|
MJ-M6C Lead-Free High Quality 6 Zones Reflow Oven With Intelligent PC Control For EMS | MJ-M6C Reflow Oven China Features The heating preservation layer adopts quality aluminum silicate heat preserving material, with good preservation ... |
 |
Guangdong Moje Intelligent Equipment Co,.LTD. | Guangdong MOJE intelligent equipment co., LTD, located in Huangpu Economic Development Zone, Guangzhou, Guangdong. The headquarters building is ove... |
|
|
MJ-M8C SMT Infrared Hot Air And Cool Air 8 Zones Reflow Soldering Oven For Led Light, PCBA | Features Special furance liner design, with good heat preservation ability and low power consumption. The quality high-temperature high-speed motor... |
|
|
High Quality Yamaha Feeder Parts Electric Feeders SS 12mm | Features Now it has been developed into high-precision electric type, which is compared with traditional structure mode, with higher transmission a... |
Same products
 |
Machine Bolt | 卖方: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD | Our inventory encompasses stainless steel machine boltscrafted from high-quality materials, inclu... |
 |
Hot Line Tap Clamp | 卖方: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD | China hot line tap clampis a tool used for connecting and fixing electrical equipment. In power s... |
 |
Glass Electrical Insulator | 卖方: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD | An insulating device made of glass called a glass powerline insulatorsis used to support and shie... |
 |
Fuse Cutout | 卖方: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD | Fuse cutouts, also called cutout switch, are used in primary overhead feeder lines and taps to sa... |
 |
Eye Nut | 卖方: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD | Eye nuts are internally threaded fasteners that are frequently used in the lifting and rigging in... |
