Leakage trace tester

• 

I. Product Overview

TheLeakage Trace Testeris a precision diagnostic tool designed to visually identify and analyze fluid/gas leakage paths in sealed systems. It employs non-destructive testing methods, combining thermal imaging and dye penetration technology to highlight leaks with fluorescent or colored markers.

• Type: Portable handheld device
• Detection Sensitivity: 0.1μm micro-leaks
• Working Modes: Fluorescent dye tracing / Smoke injection visualization
• Power Supply: Rechargeable Li-ion battery (8h continuous operation)

II. Technical Specifications

III. Key Features

• Dual Detection Modes:
  • Fluorescent Mode:Requires UV light for trace visualization
  • Smoke Mode:Generates visible vapor for pressurized systems
• Smart Indicator System:
  • LED severity scale (green/yellow/red)
  • Audio alarm with dB level adjustment
• Ergonomic Design:
  • Anti-slip rubberized grip
  • Rotatable 360° detection head
• IP Rating: IP54 dust/water resistance

IV. Compliance Standards

• ISO 10110-3 (Optical fluid leakage testing)
• ASTM E1137 (Dye penetrant standard)
• CE EN 61010-1 (Electrical safety)

V. Typical Applications

1. Automotive:Fuel injector testing, brake system diagnostics
2. Industrial:Pipeline joint inspection, HVAC system leak mapping
3. Aerospace:Hydraulic fitting validation under pressure
4. Medical:Sterile seal integrity verification

Standard Operating Procedure:

1. Surface Preparation: Clean test area with isopropyl alcohol
2. Dye Application: Apply UV tracer (0.5ml/cm²) for 15min dwell time
3. Inspection: Use 5W UV lamp at 30cm distance, scan at 45° angle
4. Post-Test: Neutralize residues with pH-balanced cleaner

Safety Precautions:

• Avoid direct eye exposure to UV light
• Use PPE when handling flammable dye solutions
• Maintain 1m clearance from open flames

Другие товары поставщика

	Barrel handling equipment	Barrel Clamps ModelDescriptionRated Load DTC Dual-Barrel Clamp 720 kg STC Single-Barrel Clamp 360 kg STD12 Transfer...
	Single chip liquid crystal touch impact testing machine	Product Introduction: Liquid crystal touch impact testing machine is mainly used for hard plastics （including sheet, pipe, plastic profile）， reinf...
	Roughness profiler	Product Introduction: The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measur...
	Conical twin screw extrusion platform	Product Introduction: The conical twin-screw torque rheometer is composed of main control unit and conical twin-screw unit, which can simulate the...
	Automatic Long Filament Curl Shrinkage Tester	Automatic Long Filament Curl Shrinkage Tester The automatic long filament curl shrinkage tester is designed for measuring boiling water shrinkage ...

Похожие товары

	Common Rail Injector Valve F00R J02 012	Продавец: 868983	Common Rail Injector Valve F00R J02 012 David Chen
	Common Rail Injector Valve F00R J02 005	Продавец: 868983	Common Rail Injector Valve F00R J02 005 David Chen
	Common Rail Injector Valve F00R J01 941	Продавец: 868983	Common Rail Injector Valve F00R J01 945 David Chen
	Common Rail Injector Valve F00R J01 941	Продавец: 868983	Common Rail Injector Valve F00R J01 941 David Chen
	Common Rail Injector Valve F00R J01 924	Продавец: 868983	Common Rail Injector Valve F00R J01 924 David Chen