Rotary reciprocating friction and wear testing machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM G99 – Standard Test Method for Wear Testing
ASTM G133 – High-Temperature Friction and Wear Test Method
ISO 20808 – Solid Material Friction and Wear Test
GB/T 3147 – Determination of Friction Material Wear Performance
Technical Specifications
| Parameter | Range / Specification |
|---|---|
| Maximum Test Force | 1000 N |
| Maximum Speed | 2000 rpm |
| Maximum Frequency | 200 Hz |
| Maximum Reciprocating Friction Force | 100 N |
| Maximum Rotational Torque | 4.7 Nm |
| Reciprocating Stroke Range | ±6 mm |
| Reciprocating Friction Modes | Ball-on-disk, Pin-on-disk, Cylinder-on-disk |
| Rotational Friction Modes | Ball-on-disk, Pin-on-disk, End-face |
| Temperature Range | Room temperature – 600℃ |
| Notes | Optional micro-force module, ring-block module available |
Features
Dual Friction Modes: Supports both rotational and reciprocating friction, with multiple friction configurations (ball-on-disk, pin-on-disk, etc.)
High-Precision Force Control: Maximum test force up to 1000 N, suitable for high-load testing
Wide Temperature Range: Capable of testing from room temperature up to 600℃
High-Speed & High-Frequency Testing: Up to 2000 rpm and 200 Hz for precise and efficient testing
Real-Time Monitoring: Friction force, test load, and temperature are continuously monitored and plotted
Multiple Friction Pairs: Supports various materials and modules, including micro-force and ring-block options
Safety Protection: Automatic shutdown or alarm if preset limits are exceeded
Accessories
| Name | Description |
|---|---|
| Micro-Force Module | Enables low-load tests with enhanced precision |
| Ring-Block Module | Provides additional friction pair configurations |
| High-Temperature Furnace | For friction testing at elevated temperatures |
| Temperature Sensors | Monitor friction pair temperature during high-temperature testing |
| Friction Pair Materials | Ball-on-disk, pin-on-disk, cylinder-on-disk, end-face, etc. |
Testing Principle
This tester evaluates the tribological behavior of materials under rotational and reciprocating motion. By applying controlled forces and adjusting parameters such as speed, frequency, stroke, and temperature, you can measure friction force, wear, and temperature changes. Real-time monitoring allows comprehensive assessment of wear resistance, friction coefficient, and surface thermal behavior under varying operating conditions.
Operation Instructions
Installation & Inspection: Ensure all connections are secure, power supply is stable, and the control system is functioning correctly.
Sample Preparation: Prepare friction pair materials and securely fix the samples in place.
Parameter Setting: Use the touchscreen to set test force, rotational speed, frequency, stroke, temperature, and friction pair type.
Start Testing: Confirm settings and start the experiment while monitoring the parameters in real time.
Data Recording & Analysis: After the test, save the data and analyze friction and wear performance using dedicated software.
Experimental Procedure
Select Friction Pair & Parameters: Choose friction pair materials and configure test parameters such as load, frequency, stroke, and temperature.
Prepare Samples: Fix the samples in the testing position, ensuring good contact with the friction pair.
Conduct Testing: Start the experiment, monitoring friction force, temperature, and other parameters in real time.
End Testing & Data Processing: Record the results and use software to analyze wear, friction coefficient, and generate a complete test report.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Minimum Ignition Energy (MIE) – Dust Cloud Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be t... |
 |
Quality Control Finger Abrasion Testing Instrument | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheUniversal Finger Abrasion Testeris a high-precision instrument designed to... |
 |
Adhesion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The adhesion tester is a device specifically used to detect the strength of the adhesion of... |
 |
Safety shoe impact meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com According to the criteria Bs-953.1870 EN-344. ANSI-Z41 CSA-Z195 ISO K88782 EN ISO 203... |
 |
Ink printing durability test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Usage: Printing ink Decolorization test machine, also known as abrasion tester, fr... |
Похожие товары
 |
Laser Chuck | Продавец: 00000 | Laser Chuck Introduce foreign advanced technology and management concept, High precision pro... |
 |
Power Pallet Jack For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac... |
 |
Multi Directional Forklift For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu... |
 |
Narrow Aisle Forklift For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide... |
 |
Electric Order Picker Supplier | Продавец: Jinan Hulk Machinery Co., Ltd | Electric Order Picker Supplier Electric Order Picker Supplier As an supplier, we offer a co... |
