Rotary reciprocating friction and wear testing machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM G99 – Standard Test Method for Wear Testing
ASTM G133 – High-Temperature Friction and Wear Test Method
ISO 20808 – Solid Material Friction and Wear Test
GB/T 3147 – Determination of Friction Material Wear Performance
Technical Specifications
| Parameter | Range / Specification |
|---|---|
| Maximum Test Force | 1000 N |
| Maximum Speed | 2000 rpm |
| Maximum Frequency | 200 Hz |
| Maximum Reciprocating Friction Force | 100 N |
| Maximum Rotational Torque | 4.7 Nm |
| Reciprocating Stroke Range | ±6 mm |
| Reciprocating Friction Modes | Ball-on-disk, Pin-on-disk, Cylinder-on-disk |
| Rotational Friction Modes | Ball-on-disk, Pin-on-disk, End-face |
| Temperature Range | Room temperature – 600℃ |
| Notes | Optional micro-force module, ring-block module available |
Features
Dual Friction Modes: Supports both rotational and reciprocating friction, with multiple friction configurations (ball-on-disk, pin-on-disk, etc.)
High-Precision Force Control: Maximum test force up to 1000 N, suitable for high-load testing
Wide Temperature Range: Capable of testing from room temperature up to 600℃
High-Speed & High-Frequency Testing: Up to 2000 rpm and 200 Hz for precise and efficient testing
Real-Time Monitoring: Friction force, test load, and temperature are continuously monitored and plotted
Multiple Friction Pairs: Supports various materials and modules, including micro-force and ring-block options
Safety Protection: Automatic shutdown or alarm if preset limits are exceeded
Accessories
| Name | Description |
|---|---|
| Micro-Force Module | Enables low-load tests with enhanced precision |
| Ring-Block Module | Provides additional friction pair configurations |
| High-Temperature Furnace | For friction testing at elevated temperatures |
| Temperature Sensors | Monitor friction pair temperature during high-temperature testing |
| Friction Pair Materials | Ball-on-disk, pin-on-disk, cylinder-on-disk, end-face, etc. |
Testing Principle
This tester evaluates the tribological behavior of materials under rotational and reciprocating motion. By applying controlled forces and adjusting parameters such as speed, frequency, stroke, and temperature, you can measure friction force, wear, and temperature changes. Real-time monitoring allows comprehensive assessment of wear resistance, friction coefficient, and surface thermal behavior under varying operating conditions.
Operation Instructions
Installation & Inspection: Ensure all connections are secure, power supply is stable, and the control system is functioning correctly.
Sample Preparation: Prepare friction pair materials and securely fix the samples in place.
Parameter Setting: Use the touchscreen to set test force, rotational speed, frequency, stroke, temperature, and friction pair type.
Start Testing: Confirm settings and start the experiment while monitoring the parameters in real time.
Data Recording & Analysis: After the test, save the data and analyze friction and wear performance using dedicated software.
Experimental Procedure
Select Friction Pair & Parameters: Choose friction pair materials and configure test parameters such as load, frequency, stroke, and temperature.
Prepare Samples: Fix the samples in the testing position, ensuring good contact with the friction pair.
Conduct Testing: Start the experiment, monitoring friction force, temperature, and other parameters in real time.
End Testing & Data Processing: Record the results and use software to analyze wear, friction coefficient, and generate a complete test report.
Send product request
Other supplier products
 |
Automotive Sunshade Assembly Line，Sunshade component assembly production line | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Sunshade Assembly Line is an integrated automated production system designed... |
 |
Solar Climatic Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1. Fully Compliant with IEC 61215 Specifically designed for the UV pr... |
 |
Surgical Blade Sharpness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Surgical Blade Sharpness Tester is a multi-functional testing device featuring a 7-inch... |
 |
EN sole bending tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The EN Sole Bending Tester is designed to assess the bending resistance and zigzag durabili... |
 |
Car seat fatigue tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Car Seat Fatigue Tester is a dedicated durability testing system used to evaluate the l... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
