Rotary reciprocating friction and wear testing machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM G99 – Standard Test Method for Wear Testing
ASTM G133 – High-Temperature Friction and Wear Test Method
ISO 20808 – Solid Material Friction and Wear Test
GB/T 3147 – Determination of Friction Material Wear Performance
Technical Specifications
| Parameter | Range / Specification |
|---|---|
| Maximum Test Force | 1000 N |
| Maximum Speed | 2000 rpm |
| Maximum Frequency | 200 Hz |
| Maximum Reciprocating Friction Force | 100 N |
| Maximum Rotational Torque | 4.7 Nm |
| Reciprocating Stroke Range | ±6 mm |
| Reciprocating Friction Modes | Ball-on-disk, Pin-on-disk, Cylinder-on-disk |
| Rotational Friction Modes | Ball-on-disk, Pin-on-disk, End-face |
| Temperature Range | Room temperature – 600℃ |
| Notes | Optional micro-force module, ring-block module available |
Features
Dual Friction Modes: Supports both rotational and reciprocating friction, with multiple friction configurations (ball-on-disk, pin-on-disk, etc.)
High-Precision Force Control: Maximum test force up to 1000 N, suitable for high-load testing
Wide Temperature Range: Capable of testing from room temperature up to 600℃
High-Speed & High-Frequency Testing: Up to 2000 rpm and 200 Hz for precise and efficient testing
Real-Time Monitoring: Friction force, test load, and temperature are continuously monitored and plotted
Multiple Friction Pairs: Supports various materials and modules, including micro-force and ring-block options
Safety Protection: Automatic shutdown or alarm if preset limits are exceeded
Accessories
| Name | Description |
|---|---|
| Micro-Force Module | Enables low-load tests with enhanced precision |
| Ring-Block Module | Provides additional friction pair configurations |
| High-Temperature Furnace | For friction testing at elevated temperatures |
| Temperature Sensors | Monitor friction pair temperature during high-temperature testing |
| Friction Pair Materials | Ball-on-disk, pin-on-disk, cylinder-on-disk, end-face, etc. |
Testing Principle
This tester evaluates the tribological behavior of materials under rotational and reciprocating motion. By applying controlled forces and adjusting parameters such as speed, frequency, stroke, and temperature, you can measure friction force, wear, and temperature changes. Real-time monitoring allows comprehensive assessment of wear resistance, friction coefficient, and surface thermal behavior under varying operating conditions.
Operation Instructions
Installation & Inspection: Ensure all connections are secure, power supply is stable, and the control system is functioning correctly.
Sample Preparation: Prepare friction pair materials and securely fix the samples in place.
Parameter Setting: Use the touchscreen to set test force, rotational speed, frequency, stroke, temperature, and friction pair type.
Start Testing: Confirm settings and start the experiment while monitoring the parameters in real time.
Data Recording & Analysis: After the test, save the data and analyze friction and wear performance using dedicated software.
Experimental Procedure
Select Friction Pair & Parameters: Choose friction pair materials and configure test parameters such as load, frequency, stroke, and temperature.
Prepare Samples: Fix the samples in the testing position, ensuring good contact with the friction pair.
Conduct Testing: Start the experiment, monitoring friction force, temperature, and other parameters in real time.
End Testing & Data Processing: Record the results and use software to analyze wear, friction coefficient, and generate a complete test report.
在线联系供应商
Other supplier products
 |
Advanced Vacuum Cleaner Particle Cleaning Performance Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 20291.1-2014: Household and Similar Electrical Appliances &nd... |
 |
Helmet Projection and Surface Friction tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet projection and surface friction tester is a device used to test the frictional f... |
 |
Cleveland Open Cup Flash Point Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The instrument can automatically test the flash point and ignition point of petroleum produ... |
 |
Liquid Sliding Penetration Comprehensive Performance Tester factory direct sale | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Features (1) Solenoid-controlled funnel: Simulates liquid applicatio... |
 |
UV Viewing Cabinet | Whats/App: +86 156 1874 6768 Web: standard-groups.com The UV Viewing Cabinet is a precision instrument designed to detect and analyze fluorescent... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
