electronic circular locus tester

Circular Locus Tester is designed to test the pilling property of fabric and fiber pure yarn and blended yarn, knitted, woven fabric.Circular Locus Tester is ultra-low noise design. Top cover opening design, easy to maintain. The specimen holder is made of high quality stainless steel material. Preset counters, easy operation.

The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the humidity state.

Standard
GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory method
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles - Wear test of flat fabrics – Roll to mill

Test Parameters
Items Parameters
Grinding head is in contact with grinding plane ≤0.2mm
The parallelism of grinding head and grinding plane ≤0.3mm
The relative movement trajectory of grinding head and grinding plane 40±1mm
Nylon brush surface is flush, its height difference <0.5mm
Grinding plane reciprocating speed 60±1 times/min
Weight of grinding head 490cN±1%
Weight of heavy hammer 290cN±1%
Weight of hammer 100cN±1%
Select the number of times 1~9999


Features
1. Scientific mechanical structure, smooth rotation, no mechanical noise, no contact fatigue failure, suitable for long continuous operation.
2. The use of standard nylon brush, the rigidity of nylon wire must be uniform, so as to control the fluff effect of nylon brush.
3. Ergonomic design, the surface using a spray forming, smooth and beautiful.

Test Reference
Sample type Pressure / cN Number of fluff times Number of pilling times
Synthetic fiber knitted fabric 590 150 150
Chemical fiber woven fabric 590 50 50
Military service (combed blended) 490 30 50
Combed wool fabric 780 0 600
Coarse wool fabric 490 0 50

Другие товары поставщика

	Plastic Smoke Density Tester	IntroductionThe main principle of smoke density measurement is that in a particular space, the cable or material produces smoke under specific comb...
	Fabric Tensile Tester	Fabric tensile tester is suitable for testing the tensile and elastic properties of the high elastic fabric and the low elastic fabric such as the ...
	Fiber Length Analyzer	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
	Taber 710 Scratch and Mar tester	This instrument is used to test the rubbing fastness of leather surface under dry friction and wet friction as well as other test conditions. Basic...
	Маска BFE тест	Bacterial Filtration Efficiency Tester is to determine the bacterial filtration efficiency (BFE) of medical face mask materials by employing a rati...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...