electronic circular locus tester
Circular Locus Tester is designed to test the pilling property of fabric and fiber pure yarn and blended yarn, knitted, woven fabric.Circular Locus Tester is ultra-low noise design. Top cover opening design, easy to maintain. The specimen holder is made of high quality stainless steel material. Preset counters, easy operation.
The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the humidity state.
Standard
GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory method
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles - Wear test of flat fabrics – Roll to mill
Test Parameters
Items Parameters
Grinding head is in contact with grinding plane ≤0.2mm
The parallelism of grinding head and grinding plane ≤0.3mm
The relative movement trajectory of grinding head and grinding plane 40±1mm
Nylon brush surface is flush, its height difference <0.5mm
Grinding plane reciprocating speed 60±1 times/min
Weight of grinding head 490cN±1%
Weight of heavy hammer 290cN±1%
Weight of hammer 100cN±1%
Select the number of times 1~9999
Features
1. Scientific mechanical structure, smooth rotation, no mechanical noise, no contact fatigue failure, suitable for long continuous operation.
2. The use of standard nylon brush, the rigidity of nylon wire must be uniform, so as to control the fluff effect of nylon brush.
3. Ergonomic design, the surface using a spray forming, smooth and beautiful.
Test Reference
Sample type Pressure / cN Number of fluff times Number of pilling times
Synthetic fiber knitted fabric 590 150 150
Chemical fiber woven fabric 590 50 50
Military service (combed blended) 490 30 50
Combed wool fabric 780 0 600
Coarse wool fabric 490 0 50
Other supplier products
|
|
Ink Abrasion Resistance Tester Ink Rub Tester |
Ink Abrasion Resistance Tester Ink Rub Tester is professionally designed for abrasion resistanceof surface coating layers of printed materials, e.g... |
|
|
Nonwovens liquid loss tester |
Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of p... |
|
|
Filter Tester MFP Nano Plus 4000 |
MFP Nano Plus 40000 with U-SMPS Real-time determination of fraction separation efficiency with two UF-CPC in raw and clean gas;MFP filter test rigs... |
|
|
Glow wire tester |
Brief IntroductionThe glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the ... |
|
|
UV Carbon Arc weather Meter |
Introduction：Weatherproof test: This test is conducted to find out the impacts on some items and parts in a natural condition bysuch factors as sun... |
All supplier products
Same products
