Electric bicycle chassis dynamometer system
Все товары поставщика
System overview:
The whole electric bicycle chassis power measurement system fully meets the national standard GB17761-2024 "Safety Technical Specifications for Electric Bicycles" Test requirements of clause 6.3.3.1 "Rated continuous output power of motor", clause 6.3.3.2 "Low-speed operation torque of motor", clause 6.3.3.3 "no-load back electromotive force of motor", clause 6.3.3.4 "Difference coefficient of inductance value of motor", Applied to electric bicycle manufacturers and quality inspection institutes for electric vehicle factory type test and quality sampling inspection. It can also be used for the analysis of electric vehicle development data. The test items include all the indicators of the whole electric bicycle and the electric motor: front wheel braking force, rear wheel braking force, braking performance, starting performance, speed performance, maximum speed, climbing performance, undervoltage test, overcurrent test, driving range, 100 li power consumption, battery capacity, coasting distance, rated continuous output power, low-speed running torque, no-load back electromotive force inductance value difference coefficient. User-friendly design and easy operation.
Technical parameters:
Loading torque: (0 —— 100) N.m, accuracy: 0.5.
1 The test system is composed of: main control cabinet, precision DC power supply, test platform, fixture actuator, etc.
2 Main control cabinet: The cabinet is beautiful in shape, easy to operate, suitable for people of different heights. A piece is installed on the cabinet for measuring and testing DC power voltmeter and AC voltmeter. The lily leaves on both sides of the cabinet are used for ventilation and heat dissipation of the strong power cabinet. There are two 60mm opening holes at the bottom of the cabinet for wiring, which are convenient for wiring. Two vertical partitions are installed in the middle of the cabinet for electrical installation.
3 Test system platform customized reference.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Convective Heat Resistance Tester | Convective Heat Resistance Tester - Textile and Apparel - standard Standards: ISO 17493 Clothing and equipment for protection against heat - Te... |
 |
Mask combustion tester | Standards: GB 19083-2010， EN 149, GB 2626, YY 0469 Applications: Mask combustion tester is to determine the fire resistance performance of... |
 |
Toilet Corrosion Test Chamber (HCl and Ammonia) | Product Description: Toilet seat hydrochloric acid and ammonia corrosion tester is used for testing to evaluate the ability of toilet seat product... |
 |
TABER 5750 Abrasion Tester | Standards: ASTM D3884 、 ASTM D1175 、 ASTM D1044 、 ASTM D4060 、 TAPPI T476 、 ISO 9352 、 ISO 5470-1 、 JIS K7204 、 JIS A1453、 JIS K6902 、 JIS L1096... |
 |
Total Knee Joint Prostheses Wear Tester | Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, a... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
