Yellowing resistance test chamber

• 

Designed specifically for testing upper and bottom materials for shoes, the chamber utilizes a 300W UV light bulb imported from Germany, ensuring high-quality and reliable results. The temperature range of the chamber is adjustable from room temperature plus 5°C to 200°C, with a uniformity of ±2°C, providing precise control over testing conditions.

The Yellowing Resistance Test Chamber features a user-friendly LED digital display and a PID temperature controller, making it easy to monitor and adjust settings. With a time control feature that allows for testing durations of up to 9999 minutes or hours, this chamber is versatile enough to accommodate various testing needs. The test frame has a diameter of 400mm and offers adjustable speeds from 1 to 20 rpm, ensuring thorough and consistent testing of samples.

Scope of application:

Test method for determining the yellowing resistance of light and white products, such as upper and bottom materials for shoes, to approximate sunlight and ultraviolet light. According to the light-colored or white products, the phenomenon of yellow color is easy to occur in the natural sunlight for a long time, with the solar lamp and heating temperature control device to simulate the natural environment, within the specified time, observe the change of the surface color of the sample, determine the degree of discoloration of the sample, so as to determine the ability of the material to resist yellow under sunlight radiation.

Applicable standards:

HG/T3986. ASTM D1748. etc.

Technical parameters:

Light source: 300W UV light bulb imported from Germany;

Temperature range: Room temperature +5℃ ——200℃℃：

Temperature uniformity :± 2'C;

Electric heating power: 500W and 1000W two groups;

Temperature control :LED digital display, PID temperature controller:

Time control :0——9999min or 0——9999h;

Test frame: diameter 400mm, speed 1——20rpm adjustable, single-layer test frame;

Working rate size :500x500x600mm(WxDxH);

Dimensions :500x500x600mm(WxDxH);

Power supply :AC220V, 1.8KW.

Другие товары поставщика

	Shoe Peeling Strength Tester	Main uses: The shoe stripping tester is mainly used to measure the bonding strength between the upper and the sole or other shoe components. By si...
	Femoral Stem Fatigue Performance Testing Machine	Standard YY/T 0809.4 (China): Specifies fatigue testing protocols for femoral stems in partial/total hip arthroplasty. ISO 7206-4 (Internationa...
	Leather Water Vapor Permeability Tester	Standards: UNI EN IUP/15, UNI EN 13515, EN ISO 20344: 6.6, IUP 15, BS 3144 Method 24, SLP 25，DIN 53333, ISO 17699, DIN 53 429, METODO - 309 WI 009...
	Spinal Internal Fixation Components System Tester	Standard YY/T 0961-2014 (China): Specifies static/fatigue testing protocols for spinal fixation systems, including connection integrity and anti...
	Scott rolling tester	Product Information: Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials. One end of...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...