Yellowing resistance test chamber
Designed specifically for testing upper and bottom materials for shoes, the chamber utilizes a 300W UV light bulb imported from Germany, ensuring high-quality and reliable results. The temperature range of the chamber is adjustable from room temperature plus 5°C to 200°C, with a uniformity of ±2°C, providing precise control over testing conditions.
The Yellowing Resistance Test Chamber features a user-friendly LED digital display and a PID temperature controller, making it easy to monitor and adjust settings. With a time control feature that allows for testing durations of up to 9999 minutes or hours, this chamber is versatile enough to accommodate various testing needs. The test frame has a diameter of 400mm and offers adjustable speeds from 1 to 20 rpm, ensuring thorough and consistent testing of samples.
Scope of application:
Test method for determining the yellowing resistance of light and white products, such as upper and bottom materials for shoes, to approximate sunlight and ultraviolet light. According to the light-colored or white products, the phenomenon of yellow color is easy to occur in the natural sunlight for a long time, with the solar lamp and heating temperature control device to simulate the natural environment, within the specified time, observe the change of the surface color of the sample, determine the degree of discoloration of the sample, so as to determine the ability of the material to resist yellow under sunlight radiation.
Applicable standards:
HG/T3986. ASTM D1748. etc.
Technical parameters:
Light source: 300W UV light bulb imported from Germany;
Temperature range: Room temperature +5℃ ——200℃℃：
Temperature uniformity :± 2'C;
Electric heating power: 500W and 1000W two groups;
Temperature control :LED digital display, PID temperature controller:
Time control :0——9999min or 0——9999h;
Test frame: diameter 400mm, speed 1——20rpm adjustable, single-layer test frame;
Working rate size :500x500x600mm(WxDxH);
Dimensions :500x500x600mm(WxDxH);
Power supply :AC220V, 1.8KW.
在线联系供应商
Other supplier products
 |
Petroleum Products Kinematic Viscosity Tester | Meet the standard: ASTM D445 ISO 3104 IP 71 Product Introduction: The determination of kinematic viscosity is performed by measuring the tim... |
 |
Intervertebral Fusion Cages Shear Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, ... |
 |
Plastic Friction and Wear Tester | Product Description: Plastic sliding friction wear tester consists of two main parts: the host machine and intelligent control system, which can b... |
 |
Mask Visual Field Tester GB 2890-2009 GB 2626-2019 | Standards: GB 2890-2009 Respiratory protection Self-priming filter gas mask 6.8 Field of vision GB 2626-2019 Respiratory protective products Self... |
 |
Helmet Surface Friction Testing Machine | Helmet Surface Friction Testing Machine - Material and Parts of Automotive - standard Standards: ECE R22.05 Applications: The Helmet Surf... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
