Helmet Xenon Aging Tester

Standards

GB/T2014-9-19. ISO 4892

ASTM G151. G154. D4329

d4587、d4799、sae j2020

Xenon lamp aging test box structure

1. the box is molded by CNC machine tool processing, beautiful and generous shape, the lid is two-way flip type, easy to operate.

2. the inner liner is made of imported stainless steel plate, the outer liner is sprayed with A3 steel plate, which increases the appearance of texture and cleanliness.

3. heating mode for the inner liner sink heating, warming fast temperature distribution.

4、Drainage system using back to the vortex type and U-type sedimentation device drainage, convenient for users to clean.

Helmet xenon lamp aging test chamber applications

Xenon lamp aging test chamber, also known as xenon arc lamp aging test chamber, the application of a wide range of industries, such as: coatings ink paints, resins, plastics, printing and packaging, adhesives, automotive and motorcycle industries, cosmetics, metals, electronics, electroplating, pharmaceuticals, etc. Xenon arc lamp aging test chamber can quickly and realistically reproduces the sunlight, rain, dew on the materials of the damage: it takes only a few days or a few weeks Q8 to reproduce outdoor need months or years To produce damage: including fading, discoloration, brightness loss, chalking, cracking, blurring, embrittlement, strength loss and oxidation.

Xenon lamp aging test chamber features

1. the specimen installation thickness can be adjusted, the specimen is fast and easy to press and install.

2. the upward rotating door does not hinder the user to operate the equipment, only occupies a small space.

3. unique condensation system using ordinary tap water can meet the requirements.

4、Water heater is under the container, not immersed in water, long life, easy maintenance.

5、Water level control is placed on the outside of the UV box, easy to monitor.

6. the equipment has casters, easy to move, casters are standard accessories.

8、Computer programming is convenient, misoperation and fault automatic alarm. Light intensity programmable

9. there amplitude illumination calibrator calibration can extend the lamp life (longer than 1600 hours).

9. there are Chinese and English manual, easy to access.

10. divided into ordinary, light amplitude illumination control type, spray type.

Xenon lamp aging test chamber technical parameters

1. the condensing device simulates the effect of outdoor humidity, the humidity can be achieved

2. there is an electronic eye irradiance control system

3. through the blackboard temperature sensor to measure the temperature accurately, can be repeated to reproduce the test results

4、Humidity, condensation, water spray can cycle continuous test

5. amplitude illuminance with CR-10 calibrator traceability and automatic calibration procedures

6. the number of test samples: 75mm × 300mm samples 24 75mm × 150mm samples 48 pieces

Xenon lamp aging test chamber control system

1. light and condensation of independent control time and alternate cycle control time can be set arbitrarily within 999h.

2、French “Schneider” components, Philips rectifier and starter (to ensure that each boot can light up the ultraviolet lamp).

3、Using black aluminum plate to connect the temperature sensor, using the blackboard temperature, instrument control heating, temperature is more stable.

4、Radiometer probe adopts fixed type, without loading and unloading every time.

5. radiation using high-precision display and measurement of ultraviolet irradiance meter.

6. light and condensation can be duly controlled can alternate cycle control.

Другие товары поставщика

	Rupture strength tester	Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic M...
	Roughness profiler	Product Introduction: The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measur...
	Face Mask Filtration Efficiency Tester	Meet the standard: ASTM F2100 ASTM F2299 EN 149 NIOSH 42 CFR Part 84 ISO 16900-3 YY 0469 YY/T 0617 Product Introduction: The primary functi...
	Tube Dropping Impact Tester	Tube Dropping Impact Tester - Material and Parts of Automotive - standard Standards: GB / T14152-2001 "Thermoplastics pipes-Determination of re...
	Fully Automatic Closed Mouth Flash Point Tester	Meet the standard: ASTM D93 ISO 2719 IP 34 ASTM D7236 Product Introduction: The flash point is a critical parameter for classifying flammab...

Все товары поставщика

Похожие товары

	pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester	Продавец: Коллирон электроникс лимитед	Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
	ORP-2026S Waterproof Soil ORP and Temperature Meter	Продавец: Коллирон электроникс лимитед	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	TDS-2616 Waterproof EC/TDS/Temperature Meter	Продавец: Коллирон электроникс лимитед	Range EC ～19.9mS TDS Temp 0～50℃ R...
	EC-98330 CF ECOstick - Nutrient Tester	Продавец: Коллирон электроникс лимитед	Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...
	PH-808 Waterproof Soil PH Meter	Продавец: Коллирон электроникс лимитед	Model PH-808 Range PH ～14.00PH Temp 0～50℃ ...