Hydrogen Sulfide Corrosion Test Chamber
Все товары поставщика
A Hydrogen Sulfide (H2S) Corrosion Test Chamber is a specialized piece of equipment used to simulate and accelerate the corrosive effects of hydrogen sulfide gas on various materials and components.
This chamber creates a controlled environment with specific concentrations of H2S, often combined with humidity and temperature control, to mimic the harsh conditions found in industries like oil and gas, wastewater treatment, and chemical processing.
Referenced Standards:
Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxide", international standard ISO 6988, QB/T 3831 "Color Change Resistance Test for Metal Plating and Chemical Treatment Layers", GB 2423.20-81 "Hydrogen Sulfide Test for Electrical Products", and other relevant global corrosion standards.
Model Specifications:
Device Name: Hydrogen Sulfide Corrosion Test Chamber, Gas Corrosion Test Chamber
Model Series: H2S-150, H2S-250, H2S-750, H2S-010
Technical Parameters:
| Model | Inner Chamber Size (W×D×H) | Outer Dimensions (L×W×H) | Power Consumption (kW) | Temperature Range | Humidity Range | Gas Concentration |
|---|---|---|---|---|---|---|
| H2S-150 | 450×600×450mm | 680×1000×1050mm | 1.1 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-250 | 600×900×500mm | 850×1420×1120mm | 1.2 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-750 | 750×1100×500mm | 1000×1650×1320mm | 2.1 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-010 | 850×1300×550mm | 1150×1900×1370mm | 2.2 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
Key Performance Indicators:
1. Temperature control: ±0.5℃/±2℃ stability
2. Gas generation: Bottled gas supply system
3. Concentration regulation: 0.1~1% (v/v) precision control
4. Humidity control: 93%~98% RH with ±2% deviation
5. Heating system: Titanium alloy nickel-chromium heater with PID+SRR synchronization
6. Safety protection: Leak detection, short-circuit protection, over-temperature protection
7. Control system: Imported PID microcomputer controller with 0.1℃ resolution
8. Sample holders: 6 V-shaped corrosion-resistant racks + 12 O-shaped test rods
Environmental Requirements:
- Ambient temperature: 25℃~35℃
- Ambient humidity: ≤75% RH
- Power supply: AC 220V/50Hz
Additional Notes:
1. All specifications measured under standard ambient conditions (25℃, no load)
2. Customized non-standard models available upon request
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Auto - ignition Point Tester for Liquids | Standards: This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(200... |
 |
Rupture strength tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic M... |
 |
Diaper leakage tester | Product Information: Main uses: Nonwovens liquid loss measurement instrument is mainly used to measure the amount of liquid loss in nonwovens mat... |
 |
Roundness Tester | Product Introduction: Roundness meter can measure the roundness, coaxiality, concentricity, runout, perpendicularity, parallelism, flatness, axis ... |
 |
Mask synthetic blood penetration tester | Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothin... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
