Hydrogen Sulfide Corrosion Test Chamber
A Hydrogen Sulfide (H2S) Corrosion Test Chamber is a specialized piece of equipment used to simulate and accelerate the corrosive effects of hydrogen sulfide gas on various materials and components.
This chamber creates a controlled environment with specific concentrations of H2S, often combined with humidity and temperature control, to mimic the harsh conditions found in industries like oil and gas, wastewater treatment, and chemical processing.
Referenced Standards:
Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxide", international standard ISO 6988, QB/T 3831 "Color Change Resistance Test for Metal Plating and Chemical Treatment Layers", GB 2423.20-81 "Hydrogen Sulfide Test for Electrical Products", and other relevant global corrosion standards.
Model Specifications:
Device Name: Hydrogen Sulfide Corrosion Test Chamber, Gas Corrosion Test Chamber
Model Series: H2S-150, H2S-250, H2S-750, H2S-010
Technical Parameters:
| Model | Inner Chamber Size (W×D×H) | Outer Dimensions (L×W×H) | Power Consumption (kW) | Temperature Range | Humidity Range | Gas Concentration |
|---|---|---|---|---|---|---|
| H2S-150 | 450×600×450mm | 680×1000×1050mm | 1.1 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-250 | 600×900×500mm | 850×1420×1120mm | 1.2 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-750 | 750×1100×500mm | 1000×1650×1320mm | 2.1 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-010 | 850×1300×550mm | 1150×1900×1370mm | 2.2 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
Key Performance Indicators:
1. Temperature control: ±0.5℃/±2℃ stability
2. Gas generation: Bottled gas supply system
3. Concentration regulation: 0.1~1% (v/v) precision control
4. Humidity control: 93%~98% RH with ±2% deviation
5. Heating system: Titanium alloy nickel-chromium heater with PID+SRR synchronization
6. Safety protection: Leak detection, short-circuit protection, over-temperature protection
7. Control system: Imported PID microcomputer controller with 0.1℃ resolution
8. Sample holders: 6 V-shaped corrosion-resistant racks + 12 O-shaped test rods
Environmental Requirements:
- Ambient temperature: 25℃~35℃
- Ambient humidity: ≤75% RH
- Power supply: AC 220V/50Hz
Additional Notes:
1. All specifications measured under standard ambient conditions (25℃, no load)
2. Customized non-standard models available upon request
在线联系供应商
Other supplier products
 |
Bone Cement Four-Point Bending Fatigue Tester | Standard YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading. IS... |
 |
Moisture Permeability Analyzer | The moisture permeability analyzer measures the water vapor permeability by the conditions that a variety of materials are applied. The test condit... |
 |
Putty sanding tester | How it works: By placing the sample of primer and putty to be measured on the rotating grinding wheel (or grinding head)， the sample is polished b... |
 |
In situ multi-channel storage gas production test system | Standard UL 1642: Standard for Lithium Batteries IEC 62133-2: Secondary Cells and Batteries Containing Alkaline or Non-Acid Electrolytes UN 38.3... |
 |
Seam Fatigue Tester | Seam Fatigue Tester - Automotive Interior - standard Standards: Toyota TSL5101G Section 3.7, GMW 3405, Nissan M-0154, Ford Motor Co. BN 106-02,... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
