Hydrogen Sulfide Corrosion Test Chamber

• 

A Hydrogen Sulfide (H2S) Corrosion Test Chamber is a specialized piece of equipment used to simulate and accelerate the corrosive effects of hydrogen sulfide gas on various materials and components.

This chamber creates a controlled environment with specific concentrations of H2S, often combined with humidity and temperature control, to mimic the harsh conditions found in industries like oil and gas, wastewater treatment, and chemical processing.

Referenced Standards:

Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxide", international standard ISO 6988, QB/T 3831 "Color Change Resistance Test for Metal Plating and Chemical Treatment Layers", GB 2423.20-81 "Hydrogen Sulfide Test for Electrical Products", and other relevant global corrosion standards.

Model Specifications:

Device Name: Hydrogen Sulfide Corrosion Test Chamber, Gas Corrosion Test Chamber
Model Series: H2S-150, H2S-250, H2S-750, H2S-010

Technical Parameters:

Key Performance Indicators:

1. Temperature control: ±0.5℃/±2℃ stability
2. Gas generation: Bottled gas supply system
3. Concentration regulation: 0.1~1% (v/v) precision control
4. Humidity control: 93%~98% RH with ±2% deviation
5. Heating system: Titanium alloy nickel-chromium heater with PID+SRR synchronization
6. Safety protection: Leak detection, short-circuit protection, over-temperature protection
7. Control system: Imported PID microcomputer controller with 0.1℃ resolution
8. Sample holders: 6 V-shaped corrosion-resistant racks + 12 O-shaped test rods

Environmental Requirements:

• Ambient temperature: 25℃~35℃
• Ambient humidity: ≤75% RH
• Power supply: AC 220V/50Hz

Additional Notes:

1. All specifications measured under standard ambient conditions (25℃, no load)
2. Customized non-standard models available upon request

Other supplier products

	Helmet Wearing Height Testing Machine	Helmet Wearing Height Testing Machine - Other test instrument - standard Standards: EN 397 Applications: Measure the wearing height of he...
	Bag plastic plug-in fatigue testing machine	Product Introduction: The machine operates under the technical standard QBT 5247-2018, ensuring that it meets industry requirements for testing. I...
	Vehicle Cabin Air Filter Tester	Applicable standards: DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration...
	Safety Helmet Impact Acceleration Tester/ Helmet Impact Testing Machine / helmet impact acceleration tester	Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance p...
	Bone Screw Static Torque Testing Machine	Standard YY/T 0591-2011: Chinese standard specifying torsion testing methods for intramedullary nails, including torque application, angular dis...

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...