Helmet Visor High-Speed Pellet Impact Tester/ Helmet visor high-speed impact tester/ Visor ballistic impact tester

• 

Introduction:

In critical environments, from motorsports and tactical operations to industrial safety and extreme sports, a helmet's visor isn't just about clear vision; it's a vital shield against high-velocity threats. When unexpected debris, projectiles, or fragments strike, the visor must maintain its integrity and prevent penetration to safeguard the wearer's eyes and face. This paramount need for robust protection underscores the importance of the Helmet Visor High-Speed Pellet Impact Tester.

This highly specialized instrument is engineered to simulate realistic, high-energy impacts on helmet visors, providing definitive data on their resistance to perforation. It's an indispensable tool for manufacturers, certification bodies, and R&D teams committed to producing and verifying the highest levels of protective eyewear performance.

Main Purpose

To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.

Applicable Standards

SNELL SA/K2010. EN 166. EN 168. ANSI Z87.1. MIL - PRF - 32432

Technical Parameters

1. quality 1g ± 0.1g; diameter 5.5mm ± 0.1mm

2. impact speed: 140~170m/s (adjustable);

3. the control panel has an emergency stop device, higher safety; digital LCD display, display the speed of the projectile (m/s);

4. the test bench has an adjustable device. Convenient for quick and easy installation of helmets;

5. high-speed speed measurement system, the use of advanced high-precision laser speed monitor;

6. the normal operation of the machine needs to be connected with an air compressor. Provide high-pressure gas original with high-precision valve, so that instantly reach the test speed;

7. equipped with a safety police display light, when the door and valve of the equipment is not closed when the equipment can not enter the test state;

8. the instrument operated by the air, the test space for the fully enclosed, the door is installed on the observation port.

Другие товары поставщика

	Rubber Mooney Viscosity Tester	Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa...
	In situ expansion analysis system	Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas...
	Profilometer	Product Introduction: The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measur...
	Schroeder twin folding tester	Schroeder twin folding tester - Other test instrument - standard Standards: 1、ISO 5626 Paper. Determination of folding endurance. 2、TAPPI 523 P...
	Scott rolling tester	Product Information: Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials. One end of...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...