Helmet Visor High-Speed Pellet Impact Tester/ Helmet visor high-speed impact tester/ Visor ballistic impact tester
Introduction:
In critical environments, from motorsports and tactical operations to industrial safety and extreme sports, a helmet's visor isn't just about clear vision; it's a vital shield against high-velocity threats. When unexpected debris, projectiles, or fragments strike, the visor must maintain its integrity and prevent penetration to safeguard the wearer's eyes and face. This paramount need for robust protection underscores the importance of the Helmet Visor High-Speed Pellet Impact Tester.
This highly specialized instrument is engineered to simulate realistic, high-energy impacts on helmet visors, providing definitive data on their resistance to perforation. It's an indispensable tool for manufacturers, certification bodies, and R&D teams committed to producing and verifying the highest levels of protective eyewear performance.
Main Purpose
To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.
Applicable Standards
SNELL SA/K2010. EN 166. EN 168. ANSI Z87.1. MIL - PRF - 32432
Technical Parameters
1. quality 1g ± 0.1g; diameter 5.5mm ± 0.1mm
2. impact speed: 140~170m/s (adjustable);
3. the control panel has an emergency stop device, higher safety; digital LCD display, display the speed of the projectile (m/s);
4. the test bench has an adjustable device. Convenient for quick and easy installation of helmets;
5. high-speed speed measurement system, the use of advanced high-precision laser speed monitor;
6. the normal operation of the machine needs to be connected with an air compressor. Provide high-pressure gas original with high-precision valve, so that instantly reach the test speed;
7. equipped with a safety police display light, when the door and valve of the equipment is not closed when the equipment can not enter the test state;
8. the instrument operated by the air, the test space for the fully enclosed, the door is installed on the observation port.
在线联系供应商
Other supplier products
 |
Femoral Stem Fatigue Performance Testing Machine | Standard YY/T 0809.4 (China): Specifies fatigue testing protocols for femoral stems in partial/total hip arthroplasty. ISO 7206-4 (Internationa... |
 |
Paint film scratch tester | Product Introduction: It is suitable for printing, labeling, mobile shell, MP3/MP4 shell, laptop computer shell and other kinds of household appl... |
 |
Mask Air Tightness Tester | Product Information: The Mask Air Tightness Tester is a portable device designed to detect the service performance and applicability of protective... |
 |
Carton drop tester | Hardened Concrete Bubble Spacing Coefficient Analyzer - Other test instrument - standard Standards: GB/T4857.5, 1S02248, etc. Applications... |
 |
Shoe Peeling Strength Tester | Main uses: The shoe stripping tester is mainly used to measure the bonding strength between the upper and the sole or other shoe components. By si... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
