Fully Automatic Terminal Crimping Machine
The operation procedure of Full Automatic Crimping Machine
1. The operator must be trained to post the certificate for working;
2. Pre-operation refueling and machine check:
1) Refueling and conducting machine inspection for each action part, refueling according to the "maintenance and check" list of refueling;
2) Preheating operation (idle speed) :
① In order to stabilize the machine, please reheat for 5 minutes.
② Due to the solidification of oil in winter, please slightly lengthen the preheating time.
③ The operation mode during preheating is set to " idling mode".
④ If there are wires and molds, please remove them before running;
3. Attentions during working:
① Firstly, install the electronic wire on the machine host;
② Prepare the terminal and mold, and install them on the press machine;
③ Set the cutting length of the wire and the length of the stripping and confirm them;
④ Move the electric wire to one side of the press and the pressing position of the mold.
⑤ Confirm the pressure state (position, etc.) by the manual operation for crimping, if it is not fit, modify the processing data and adjust the operation of pressing height, and repeat the operation after ④;
⑥ Step by step, return the wire back to its original position, sending the wire through the feed switch to confirm the shape and height of the pressure.
⑦ Move the wire to side2terminal crimping machineand mold crimping position.
⑧ Confirm the pressure state (position, etc.) by the manual operation for crimping.
⑨Cycling operation and confirm the processing state of the product. If there is no abnormality, extract the electric wire in the machine by the EJECT mode.
⑩ Set the production number, start producing and performing the visual inspection.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Round Bottle Labeling Machine | Common Problems of Semi—AutomaticRound Bottle Labeling Machine Ⅰ. The position of labeling is unstable 1. It is likely that the pressure ... |
 |
BJ-02E 4 Drivers Wire Cutting Machine | Operation Video ofBJ-02E 4 Drivers Wire Cutting Machine Specification ofBJ-02E 4 Drivers Model: BJ-02E FOUR DRIVERS Power: AC220/ 50HZ 110V/... |
 |
Enameled Wire Stripping Machine | Installation and use of enameled wire stripping machine. Choose appropriate peeling wheel and install them on the machine. Put two enameled wire i... |
 |
Enameled Wire Stripping Machine | Enameled Wire Stripping Machine XC-0316 Enameled Wire Stripping Machine * Model: XC-0316* Wire Size Range: 0.3 ~ 2.5mm* Stripping Len... |
|
|
Fully Automatic Terminal Crimping Machine | The operation procedure of Full Automatic Crimping Machine 1. The operator must be trained to post the certificate for working;2. Pre-operation re... |
Похожие товары
 |
Rail Welder A Frame aligners railway welding tools | Продавец: 834406 | 产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。 |
 |
2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system | Продавец: 824681 | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm... |
 |
Horizontal Machining Center | Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. | Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ... |
 |
Horizontal Lathe | Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. | As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool... |
 |
Gantry Machining Center | Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. | SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty... |
