Fully Automatic Terminal Crimping Machine
The operation procedure of Full Automatic Crimping Machine
1. The operator must be trained to post the certificate for working;
2. Pre-operation refueling and machine check:
1) Refueling and conducting machine inspection for each action part, refueling according to the "maintenance and check" list of refueling;
2) Preheating operation (idle speed) :
① In order to stabilize the machine, please reheat for 5 minutes.
② Due to the solidification of oil in winter, please slightly lengthen the preheating time.
③ The operation mode during preheating is set to " idling mode".
④ If there are wires and molds, please remove them before running;
3. Attentions during working:
① Firstly, install the electronic wire on the machine host;
② Prepare the terminal and mold, and install them on the press machine;
③ Set the cutting length of the wire and the length of the stripping and confirm them;
④ Move the electric wire to one side of the press and the pressing position of the mold.
⑤ Confirm the pressure state (position, etc.) by the manual operation for crimping, if it is not fit, modify the processing data and adjust the operation of pressing height, and repeat the operation after ④;
⑥ Step by step, return the wire back to its original position, sending the wire through the feed switch to confirm the shape and height of the pressure.
⑦ Move the wire to side2terminal crimping machineand mold crimping position.
⑧ Confirm the pressure state (position, etc.) by the manual operation for crimping.
⑨Cycling operation and confirm the processing state of the product. If there is no abnormality, extract the electric wire in the machine by the EJECT mode.
⑩ Set the production number, start producing and performing the visual inspection.
Send product request
Other supplier products
 |
Pneumatic Terminal Crimping Machine | Pneumatic Terminal Crimping Machine Cable Hydraulic Crimping Machine BJ-30T * Force:20Ton* Applicable Scope:1-200mm² wire* Strok... |
 |
Automatic Tape Dispenser | M-1000 Automatic tape dispenser * Tape Width: 7 ~ 50mm* Cut Length: 5 ~ 999mm, Digital Length Adjustment.* Length setting: Digital* Ac... |
 |
BJ-912B V-cut PCB Separator | Specification ofBJ-912B V-cut PCB Separator Voltage: AC 110 / 220V Power Supply: 60 / 50Hz Weight: 40Kg Measurement: 690*430*460mm Featu... |
 |
RT-3000 PP Tape Dispenser | Specifications ofRT-3000 PP Tape Dispenser Available Width: 3 ~ 25mm Available Length: 9 ~ 61mm Power Supply: AC110V 60Hz / AC220V 50Hz Mea... |
 |
Labelcombi-100 Label Sticker Dispenser | Features ofLabelcombi-100 Label Sticker Dispenser The smallest area occupation, becomes to everywhere with its pretty and class design for stick... |
Same products
 |
2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system | Seller: 824681 | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm... |
 |
Horizontal Machining Center | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ... |
 |
Horizontal Lathe | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool... |
 |
Gantry Machining Center | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty... |
 |
Floor Type Boring Mill | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | Floor Type Boring Mill is suitable for large size jobs to do milling, boring, drilling, etc. The ... |
