Automaitc Coil Winding Machine

• 

What are the most common problems with automatic coil winding machine and what are the using techniques?

There are four common problems with thecoil winding machine: flatness -- winding number -- polarity ---- wounding coil

1. The factors affecting the flatness:

1). Equipment problems:

A. The machine runs unstably, shake and swing. -- Please repair and maintain the machine.

B. The winding axis centration is different from that of the main axis, and it swings when rotating. -- The installation work is unreasonable and the shaft is not completed.

C. The outlet is too big, and the coil can swing freely in a wide range. -- The outlet is not suitable.

D. The size of the spool is not matched with the hole in the rubber shell. -- The tool does not match the material.

2). Setting and adjusting problems:

A. The starting point: set it in accordance with the position of the rubber shell on the spool. And adjust slightly in the real work in accordance with the testing effect.

B. Width: set it in accordance with the winding groove width of the rubber shell. And adjust slightly in the real work in accordance with the testing effect.

C. Coil diameter: the rough coil diameter is the total width of a certain section divided by the total winding number.

D. Tension: the dynamic tension of the coil winding should be moderate. It will affect the coil overall uniformity if the tension is too large or too small.

E. The outlet is too far away from the rubber shell. The coil free swing range becomes large because of inertia, the control of the coil is weakened. The distance between the outlet and the rubber shell should be treated differently: the coil will be more orderly when the coil diameter is larger.

F. The coil frame is loose, and it wobbles with the wiggle of the coil.

3). Use problem: the rubber shell is not inserted in position or moved when winding.

2. The factors influencing winding number:

1). Machine settings: be more careful when a winding is completed in multiple segments; There may also be an impact on a slow machine without stopping.

Другие товары поставщика

	BJ-T10 Automatic Screw Dispenser	Operation Video ofBJ-T10 Automatic Screw Dispenser Feature ofBJ-T10 Model: BJ-T10 L≥ 1.2P(The diameter of screw) versatility, flexible o...
	Round Bottle Labeling Machine	Common Problems of Semi—AutomaticRound Bottle Labeling Machine Ⅰ. The position of labeling is unstable 1. It is likely that the pressure ...
	RT-3000 PP Tape Dispenser	Specifications ofRT-3000 PP Tape Dispenser Available Width: 3 ~ 25mm Available Length: 9 ~ 61mm Power Supply: AC110V 60Hz / AC220V 50Hz Mea...
	Automatic Label Rewinder	Automatic Label Rewinder AL-938 Label Rewinder Machine * Available Width: 20 ~ 150mm* Speed: 200mm/sec* Max. OD of Roll: 230mm* ID of R...
	BJ-08T Wire Twisting Machine	Product features ofWire Twisting Machine BJ-08T Axis design, while standing! Greatly improve production efficiency LCD backlit display, modern ...

Похожие товары

	Rail Welder A Frame aligners railway welding tools	Продавец: 834406	产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。
	2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	Продавец: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
	Horizontal Machining Center	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...
	Horizontal Lathe	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool...
	Gantry Machining Center	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty...