P18: 200A double ratio voltage output AC current clamp
The P18 AC current clamp is a general purpose 200A AC current clamp ct designed for use with DMMs, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The P18 clamp ct has an integral 2.5m lead terminated. FEATURES Holding wire diameter: φ18mm; Frequency 10Hz-2MHz Bandwidth; High times harmonic measurement; Conforms to EN 61010, 600V CAT III; Low phase shift for power measurement; Improved ergonomic design & easy operation; High precision 0.1% for current measurement; Basic parameters : Ratio:1000:1 or 2000:1 (customized) Accuracy class:0.1%, 0.2% Primary current:0 - 10A AC and 0-200A AC Secondary current:0 - 100mA AC and 0 - 200mA AC Load capacity:≤20Ω, standard 4Ω Frequency range:10Hz-2MHz Max. jaw opening (mm):18
Other supplier products
|
|
GF302D THREE-PHASE ENERGY METER TEST EQUIPMENT |
The product GF302D is a portable three-phase kWH meter test equipment,which are mainly used to test the error of single-phase or three-phase energy... |
|
|
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR |
APPLICATION
■ Power plant;
■ Universities;
■ Panel manufacturer;
■ Research institutes;
■ Electrical testing center;
■ Multimeter manufacturers;
■... |
|
|
单相电表测试仪 |
GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数——电压、电流、有功功率、无功功率、视在功率、谐波、相角、功率因数、频率、能量等。 |
|
|
单相电表测试仪 |
GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数——电压、电流、有功功率、无功功率、视在功率、谐波、相角、功率因数、频率、能量等。 |
|
|
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR |
The GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected with PC to control, become automatic verification system. It has... |
供应产品
Same products
