Safety Helmet Electrical Insulation Tester GB/T2811
Product Introduction:
Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high degree of automation, easy to operate, widely used in safety hat manufacturers and major quality inspection units.
Meet the standard:
GB/T2812-2006 Safety helmet test method
GB/T2811-2007 Safety helmet
Product Features:
Plastic sink or water bath system designed to contain water and accommodate the safety helmet for testing in a wet condition, without interfering with electrical measurements.
Electrodes for applying high voltage to the safety helmet, including a probe with a specific diameter (4mm) and hemispherical top.
LED digital display providing real-time readouts of current and voltage values during the test.
Capability to apply high voltage according to a specific sequence: increasing the voltage to 1200V ± 25V within 1 minute and maintaining it for 15 seconds.
Voltage regulator with a range of 1500V to control the applied voltage.
Built-in timer to control the duration of the high-voltage application, with a specified error ($pm$1%).
Accurate measurement of current and voltage, with expression value errors of $pm$1%.
Configurable test head die or electrode to meet various helmet testing requirements.
High level of automation for the test procedure.
Safety features (implied for high voltage testing) to protect the operator.
Technical parameters:
1. the current expression value error of ±1%
2. voltage value error ±1%
3. timer value error ±1%
4. the diameter of the probe is 4mm, the top is hemispherical
5. The voltage is increased to 1200V±25V within 1min and maintained for 15s
6. voltage regulator: range 1500V
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Schopper Abrasion Tester | Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust... |
 |
Catheter Hydraulic Leakage Tester | Compliance Standards GB/T 15812.1. etc. Main Uses The catheter hydrostatic pressure resistance and leakage tester is a device specifically desig... |
 |
Geosynthetic direct shear drawing friction tester 丨Geotextile Test Machine | The friction characteristics of the interface of sand/geotextile were determined by testing the contact surface of standard sand/geotextile. This i... |
 |
Launder-Ometer Washing Fastness Tester | Textile Testing Products | Testing Standards: ISO 105 C01 C02 C03 C04 C05 C06 C08 D01. BS 1006 C01 C02 C03 C04 C05. AATCC 28 61 86 132 151 190. NEXT TM2 3 5. M&S C4 C5 C... |
 |
Water bath indentation hardness tester / Indentation Resistance Tester | Product Introduction: Water bath indentation hardness tester is used to determine the indentation hardness of extruded polyethylene anticorrosive ... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
