Heat Storage Performance Tester ASTM F2731

Standards

ASTM F2731 ?Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems

Applications

The equipment is used to detect heat storage and thermal transfer characteristics of protective clothing, safety shoes, gloves, helmet and other materials, and determine the possibility that protective equipment can cause skin burns when exposed to heat.

Product Information

Introduction

Heat Storage Performance Tester provides standardized procedures and controls radiation heat conditions, providing repetitive measurement for heat storage and thermal transfer of protective fabric materials. Through measurement, the characteristics and rating of the material can be quickly identified, and the possibility of burn to the material is predicted through the integrated burn model of the instrument.

Product Details

Instrument Structure:

The equipment includes radiant heat source, sample holder, calorimeter induction component, pneumatic start transfer tray with water-cooled slide frame, compressor, DAQ/control system and combustion injury analysis program.

Instrument Features:

·Assessing the possibility of skin burns which is related to the heat energy storage performance of fabric.

·Automatic or manual test operation

·Radiant plate heat source (adjustable temperature) generates radiation energy, which matches with the spectral line density of building fire.

·The water-cooled sample sliders, electronic driven, realizes the precise control of the time of exposure on the heat source.

·The pneumatic compressor uses a low conductivity core bar to apply a 1PSI load on the sample.

·The system includes the integrated burn model, which predicts the severity of skin injuries, and calculates the estimated time of exposure leading to secondary burns.

·The combustion results are real-time values and the graph shows the skin layer interface temperature and combustion synthesis of Omega.

System Including:

·Dell PC laptop.

·ThermDAC software with a combustion model

·Signal conditioning circuit and USB interface

·Power supply and control cable, operator manual

·One-year warranty.

Laboratory Requirement:

·The laboratory should be well ventilated with dry compressed air source and cooling water supply pipe.

·The desktop device is designed for operation of horizontal or vertical radiant heat sources.

·It is recommended to operate in a vertical direction.

Standard Specification

·The radiant heat plate range is 0-0.25 CAL/cm2. adjustable.

·There are two types of hot plate operating modes: temperature control or heat flow control.

·The water-cooled sample slider supports sample and copper calorimeter exposes the sensor.

·Pneumatic control compression system

·The sample compression force can be adjusted by changing the air pressure in the cylinder.

·Sample size: 6x6ft (15x15cm). Gaskets with different thickness can be provided to compress the edges of smaller samples.

Technical Parameters

Items	Parameters
Dimension	24.5”x 17”x 14”H（62x43x36cm H）
Space required	36”x 20”x 16”H（92x51x41cm H）
Power	200-265VAC，50/60Hz, single phase. Maximum rated current is 5Amps
Compressed air	Clean/dry air 50-90PSI
Cooling water	32.5℃. The flow rate is 100ml/min or greater (Local tap water is acceptable )
Radiant heat plate range	0-0.25cal/cm2, adjustable
Sample size	6x6 inches (15x15cm)

Другие товары поставщика

	Safety Helmet Chin-strap Strength Tester/ Chin strap tensile tester / helmet chin strap tester	Standard GB/T 2812-2006: Safety Helmets GB/T 2811-2019: Head Protection – Vocabulary and Test Methods Equivalent Compliance: ISO/EN 397 ...
	Aperture analyzer	An Aperture Analyzer is a specialized instrument used to measure the size and distribution of pores or openings (apertures) within various material...
	Falling ball impact testing machine	Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other materials and coatings. Perf...
	Vehicle Cabin Air Filter Tester	Applicable standards: DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration...
	Battery diaphragm permeability tester	Meet the standard: GB/T458, ISO536/2, QB/T1667, GB/T23227, ISO2965, YC/T172, GB/T12655, S05636/3, IS05636/5, GB/T20042.7-2014, GB/T36363-2018, ...

Все товары поставщика

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...