45 Degrees Wire and Cable Burning Testing Equipment
Introduction:
The 45 degrees wire and cable burning instrument is designed to assess the flammability characteristics of single insulated wires and cables. This essential testing device plays a crucial role in ensuring the safety and reliability of electrical wiring across various applications, including automotive, industrial, and consumer electronics.
The instrument typically features a specimen holder that clamps the wire or cable at a precise 45-degree angle. A standardized Bunsen burner with specific dimensions and flame characteristics is then positioned to apply a controlled flame to the specimen for a predetermined period. The angle of 45 degrees is critical as it simulates a realistic scenario where flames might propagate along a tilted cable.
During the test, the operator observes the burning behavior of the wire or cable, noting parameters such as the flame propagation distance, the time it takes for the flame to extinguish (if it does), and the extent of damage to the insulation. These observations help determine the cable's resistance to flame spread and its ability to self-extinguish, which are key indicators of its fire safety performance.
Compliance with international standards like ISO 6722 for automotive wiring and IEC 60332 for general electrical cables is often a primary goal of this testing. The 45 degrees burning test is a fundamental method for evaluating the effectiveness of flame-retardant materials used in wire and cable insulation, ensuring that they meet the required safety and regulatory guidelines for their intended use.
Main technical parameters：
Type: touch screen automatic
Sample length: 600 ± 25mm
Fuel: methane gas or gas (own)
Flame application time: 0 —— 999.9S can be set arbitrarily
Afterburning time: 0 —— 999.9S
Flame length: inner flame 50 outer flame 100
Combustion box size: 550mm x 300mm x 700mm, with transparent glass window in front, you can observe the burning situation of the pattern
Equipment dimensions: 840mm x 300mm x 700mm
Nozzle diameter: 9mm
Blowtorch length: 100mm
The equipment is controlled by the touch screen automatic control system, the high pressure ignition is automatically calculated, the flame is automatically extinguished, and the test data can be saved
Complete configuration: control box, combustion box, burner, solenoid valve, high pressure igniter, gas pipe and signal control line group.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Intramedullary Nails Internal-fixation Pull-out Force Tester | Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loading protocols). ISO 12172: Implants for surgery—Pa... |
 |
Mask Visual Field Tester | Application: Mask Visual Field Tester to determine whether field of vision under the mask meets the standard requirement or not. Standards: GB 2... |
 |
Solid electrolyte analysis device | Standard ISO 9001:2015(Quality Management System) ASTM E1970-21(Standard Guide for Electrochemical Impedance Spectroscopy) IEC 62660-2(Secondary... |
 |
Carpet Flammability Tester | Standards: BS 4790. ISO 6925. BS 6307 Applications: The Flammability Tester is used to test the effects of a small source of ignition on floor c... |
 |
Electrical bushing flame retardant tester | Product Introduction: The flame retardant test instrument for electrical bushing is used to measure the flame retardant performance of PVC cold fo... |
Похожие товары
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Продавец: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Продавец: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
