45 Degrees Wire and Cable Burning Testing Equipment
Introduction:
The 45 degrees wire and cable burning instrument is designed to assess the flammability characteristics of single insulated wires and cables. This essential testing device plays a crucial role in ensuring the safety and reliability of electrical wiring across various applications, including automotive, industrial, and consumer electronics.
The instrument typically features a specimen holder that clamps the wire or cable at a precise 45-degree angle. A standardized Bunsen burner with specific dimensions and flame characteristics is then positioned to apply a controlled flame to the specimen for a predetermined period. The angle of 45 degrees is critical as it simulates a realistic scenario where flames might propagate along a tilted cable.
During the test, the operator observes the burning behavior of the wire or cable, noting parameters such as the flame propagation distance, the time it takes for the flame to extinguish (if it does), and the extent of damage to the insulation. These observations help determine the cable's resistance to flame spread and its ability to self-extinguish, which are key indicators of its fire safety performance.
Compliance with international standards like ISO 6722 for automotive wiring and IEC 60332 for general electrical cables is often a primary goal of this testing. The 45 degrees burning test is a fundamental method for evaluating the effectiveness of flame-retardant materials used in wire and cable insulation, ensuring that they meet the required safety and regulatory guidelines for their intended use.
Main technical parameters：
Type: touch screen automatic
Sample length: 600 ± 25mm
Fuel: methane gas or gas (own)
Flame application time: 0 —— 999.9S can be set arbitrarily
Afterburning time: 0 —— 999.9S
Flame length: inner flame 50 outer flame 100
Combustion box size: 550mm x 300mm x 700mm, with transparent glass window in front, you can observe the burning situation of the pattern
Equipment dimensions: 840mm x 300mm x 700mm
Nozzle diameter: 9mm
Blowtorch length: 100mm
The equipment is controlled by the touch screen automatic control system, the high pressure ignition is automatically calculated, the flame is automatically extinguished, and the test data can be saved
Complete configuration: control box, combustion box, burner, solenoid valve, high pressure igniter, gas pipe and signal control line group.
在线联系供应商
Other supplier products
 |
Metal Bone Screws Torque Test machine | Standard YY/T 1506. ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ... |
 |
" Adiabatic Rate Calorimeter " | Product Description Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal ... |
 |
Medical Face Mask Pressure Difference Measuring Device | Medical face mask differential pressure tester also called mask breathility tester is to determine the breathability of medical face mask materials... |
 |
5kN Universal Testing Machine 丨5kN Universal Tester | Product Introduction This series of testing machines realizes the automatic control of the test process, data acquisition and analysis through the... |
 |
Intramedullary Nails Four - point Bending Fatigue Tester | Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load appl... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
