Wear-resistant titanium carbide rod cutting tool manufacturing material
The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding. When processing sticky materials such as aluminum alloy and copper alloy, the phenomenon of "tool sticking" is less likely to occur, ensuring a smooth processing surface. Its surface can be further enhanced in terms of wear resistance and oxidation resistance through coating treatment (such as TiAlN coating), increasing the tool life by more than 50%. In the field of medical devices, it is often used to make orthopedic surgical instruments, which not only ensures sharpness but also can withstand high-temperature disinfection without deformation. Compared with traditional high-speed steel rods, the cutting speed of hard alloy titanium carbide round rods can be increased by 3 to 5 times, and the processing time can be significantly shortened in mass production. Its microstructure is uniform, and the grain size can be controlled below 1μm, ensuring consistent performance in all parts of the bar and avoiding tool failure caused by uneven material. In the mold industry, the cold stamping die inserts made from it have a service life 50 to 100 times that of steel inserts, which can significantly reduce the replacement frequency and production costs.
Другие товары поставщика
|
|
Titanium carbide hard rods - preferred for tool manufacturing |
Titanium carbide cemented carbide round rods are high-performance components fabricated through a powder metallurgy process, with titanium carbide ... |
|
|
Factory direct supply carbide guide wheel guide roller |
Guide roll (guide wheel) is the steel field bar, wire rod rolling equipment on the main consumption of spare parts, in the rolling process, to ensu... |
|
|
Titanium carbide hard alloy guide wheel industry |
Hard alloy titanium carbide guide wheels have excellent impact resistance. When the wire is suddenly tensioned or broken, they are not prone to cra... |
|
|
High-density titanium carbide rods are preferred for stamping dies |
Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, and ... |
|
|
Titanium carbide powder with controllable particle size distribution |
Titanium carbide powder exhibits excellent chemical stability, being insoluble in water, hydrochloric acid, sulfuric acid, and other common acids... |
Все товары поставщика
Похожие товары
