Wear-resistant titanium carbide rod cutting tool manufacturing material
The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding. When processing sticky materials such as aluminum alloy and copper alloy, the phenomenon of "tool sticking" is less likely to occur, ensuring a smooth processing surface. Its surface can be further enhanced in terms of wear resistance and oxidation resistance through coating treatment (such as TiAlN coating), increasing the tool life by more than 50%. In the field of medical devices, it is often used to make orthopedic surgical instruments, which not only ensures sharpness but also can withstand high-temperature disinfection without deformation. Compared with traditional high-speed steel rods, the cutting speed of hard alloy titanium carbide round rods can be increased by 3 to 5 times, and the processing time can be significantly shortened in mass production. Its microstructure is uniform, and the grain size can be controlled below 1μm, ensuring consistent performance in all parts of the bar and avoiding tool failure caused by uneven material. In the mold industry, the cold stamping die inserts made from it have a service life 50 to 100 times that of steel inserts, which can significantly reduce the replacement frequency and production costs.
Other supplier products
|
|
Titanium carbide guide wheels suitable for processing complex cross-sections |
The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
|
|
Customized titanium carbide powder |
This powder has good electrical and thermal conductivity, electrical conductivity of 3 × 10⁴S/m, thermal conductivity of 35W/(m-K), can be ... |
|
|
Particle size 50-200nm titanium carbide powder |
Titanium carbide powder is a kind of gray-black ultra-fine powder, the purity can be up to 99.9% or more, the average particle size between 0.5-5... |
|
|
High cost-performance chromium carbide powder |
Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon conte... |
|
|
Customised diameter/length round bars available |
Titanium carbide alloy round bar is made of titanium carbide as the hard phase and metal powder as the binder phase, which is made by powder meta... |
供应产品
Same products
